FuehlerSysteme eNET International The Brand for Sensor Technology Sensor Technology Temperature Humidity Pressure Air Quality Flow Brightness Meteorology

Company FuehlerSysteme eNET International GmbH develops, produces and markets sensor technology for measuring environmental conditions such as a temperature, humidity, pressure, air quality, current, brightness and movement. FuehlerSysteme, as one of the few providers in this sector, is equipped with a broad spectrum of products that offers the appropriate solution for any measurement. Customisation is also available, enabling a high level of flexibility. FuehlerSysteme’s target group lies within building automation systems and energy management as well as in the industrial processes sector....

Exhibitions Exhibition Dates 2016 This year we will once again be attending more than one of the leading trade fairs in the field of measurement technology and control engineering. Come and visit us to find out about our new products and to gain an on-the-spot insight into the functionality, quality and efficiency they are able to deliver. We will be delighted to provide you with any guidance you may need and are looking forward to meeting you in person! Frankfurt a. M., 13.03.-18.03.2016 Hall 9, Stand C56 World‘s Leading Trade Fair for Lighting and Building Technology Milano, 15.03.-18.03.2016...

Outdoor Transducers Average Value Transducers 98 1.5. Room Control Units 138

Table of Contents 2. Humidity 2.1. Humidity Sensors Humidity Transducers Humidity Transducers for Ducts Humidity Transducers for Indoor Humidity Transducers with Pendular Probe Humidity Transducers for Ceiling Mounting 2.2. Humidity and Temperature Transducers Humidity and Temperature Transducers Humidity Transducers with Passive Temperature Output Humidity and Temperature Transducers for Ducts Humidity Transducers with Passive Temperature Output for Ducts Humidity and Temperature Transducers for Indoor Humidity Transducers with Passive Temperature Output for Indoor Humidity and Temperature Transducers...

4.1. Air Quality Sensors for Mixed Gas (VOC) 212 Air Quality Sensors for Mixed Gas (VOC) 212 4.2. Air Quality Sensors for C02 Concentration 224 Air Quality Sensors for C02 Concentration 224 4.3. Air Quality Sensors for CO Concentration 238 Air Quality Sensors for CO Concentration 238 Motion-/ Brightness Sensors 274

Table of Contents 7. Meteorology 7.1. Weather Stations Weather Stations Compact 7.2. Precipitation Rain Sensors Precipitation Sensors 7.3. Wind Speed Wind Speed Transmitters 7.4. Wind Direction Wind Direction Transmitters 7.6. Pyranometers 295 Pyranometers 295 7.7. Meteorology-Accessories Traverses and Masts Digital Displays 298 Screw-in Nipples 299 Compression Clamps 300 Mounting Flanges 301 Pt100 Temperature Transducers 302 Immersion Sleeves 308 Other Accessories 310 Plugs 311 Accessories for Duct Smoke Detectors 312 Accessories for Humidity and Temperature Probes 314 Adapters / Hose Connection...

Innovations Multifunctional Air Quality Sensor for CO2, Mixed Gas VOC, Humidity and Temperature with Measuring Range Changeover The multifunctional air quality sensor CO2-M/A measures the CO2 concentration in the ambient air in the range of 0-10000 ppm (NDIR), mixed gas VOC in the range of 0...100% based on the calibration gas, the temperature and optionally the relative humidity, absolute humidity, mixing ratio or the dew point temperature of the ambient air. The transducer converts the respective measurement results for further processing into a linear output signal 0-10 V or 4-20 mA. Furthermore,...

Manual calibration of the output signal to 400 ppm (CO2 zero point) respectively 1 V (VOC zero point) by pushing the button Automatic self calibration on a regular interval to ensure a highly accurate CO2 measurement Measurement type rel. humidity %, abs. humidity g/m3, air fuel ratio g/kg, dew point °C selectable via DIP switch 3 CO2 measurement ranges selectable via DIP switch Auto-Calibration ON/OFF Selection atmospheric / barometric Air Pressure Measurement value correction via offset-controller Linear output signal 4-20 mA, 0-10 V Change-Over Contact

Innovations Motion/Brightness and Temperature Sensor for Ceiling Mounting The motion/brightness and temperature sensor BHT-D/A measures movements in the area of 360° with a range of about 10 m by an infrared sensor, brightness from 0-1 kLux by a photo diode and the temperature from 0...+50°C. The holding time of the motion detector can be defined by a 270° potentiometer from 5 seconds to 15 minutes. The unobtrusive housing with snap fastening and torque/pole-protected plug is suitable for quick mounting in suspended ceilings. The motion sensor is ideal for control processes, such as temperature...

Innovations Mini Motion Probe with Infrared Sensor for Ceiling Mounting The mini motion sensor BFD2/A measures movements in the area of 360° with a range of about 10 m by an infrared sensor. In case of movements a normally-open contact is switching, which holding time can be set from 5 sec. up to 15 min. by a 270° potentiometer. The unobtrusive housing with snap fastening and torque/pole-protected plug is suitable for quick mounting in suspended ceilings. The motion sensor is ideal for control processes, such as temperature and lighting control systems in offices. Snap fastening and removable...

Innovations Humidity and Temperature Transducer Sensor Protection in the high humidity range > 95% The humidity and temperature sensor with transducer measures the temperature and selectively the relative humidity, absolute humidity, air fuel ratio or dew point of the ambient air and transforms it to a linear output signal 0-10 V or 4-20 mA. The secondary measuring value is selectable from the 4 measurement categories % r.H., g/m³, g/kg, DP by a DIP switch. The humidity and temperature sensor is protected against contamination by a screwable sinter filter. In addition, the humidity measuring...

Innovations Heating Function Procedure: 1. Relative humidity exceeds the factory-preset threshold value (95...99% r.H.) 2. Heating function is activated for sensor protection 3. During the heating phase, the output signal is kept stable throug compensation 4. The temporally limited heating function will be deactivated 100% condensation protection at high humidity range Measurement type rel. humidity %, abs. humidity g/m3, air fuel ratio g/kg, dew point °C selectable via DIP switch LCD display, to display the measured values on location 4 temperature measurement ranges selectable Screwable stainless...