| Linear Systems series GS The GS linear system differs from the GD system for the precis tin :.h;iit liisti-;- intj screw, the same sci to the customer's structure. The GS system can be used with inward (Fig.3! m ™i™rd (hy ■■) mounted precision shafts. The distance hetween she two ro'k ran br increased or decreased, which nakps.' pcvJh ? for tin' ru I or an efficient •.■/•■ ten npoia^on, it is necessary to make sure the two guides are perfectly parallel w This can be obtained hy usuifjsparer as t;-ninla:e wlim tightening the fastening screws. The profile sections are listed in Table 2. The GS system rollers are the same as in the GD system. The profile maximum length is 6000 mm. |