| Linear Systems series GD The GD linear system is composed by a guide rail and a carriage. The rail consists of an anodized aluminium extrusion where two hardened, chrome-plated and straightened precision shafts are inserted with H7 tolerance. Rolling procedure is used to secure the shafts into the guide rail. The rail maximum length is 6000 mm. The carriage is composed by an anodized aluminium (steel upon demand) plate. Four, two eccentric and two concentric, "V"shaped n i k [_] rollers with 120° opening angle are fixed to the plate. The standard systems codes and dimensions are listed in Table 1. Our technical department is available for any calculation or development of product versions that are not included in our catalogue. |