Text version of the page 
Text version of the page 
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FLUX | | | | | | CO | | | | | | FLUX Centrifugal Immersion Pump F 640 PP in Polypropylene Size 15, 30, 15 Z and 30 Z Typical applications Transferring low flammability liquids up to a viscosity of 2500 mPas (cP) from containers, tanks, either open topped or closed. Transferring corrosive liquids in chemical processing and engineering, metal-working and electroplating together with water treatment and waste water treatment. Suitable for stationary or portable application. Construction features Vertical centrifugal immersion pump in polypropylene consisting of an inner tube and outer tube. The centrifugal impeller in the pump housing is driven by the motor via the drive shaft. The drive shaft is supported by intermediate manufacturer of bearings within the plastic sleeved steel inner tube, a mechanical seal separating the liquid from the bearings and upper shaft. This construction provides the ultimate in stability, preventing elongation of the plastic at high temperatures and ensures the maximum integrity of the mechanical seal. With an open conical impeller or a closed centrifugal impeller (Z). The liquid is delivered between the inner and outer tubes to the pump outlet. Three-phase motors in differing kW-ratings are available as a matched power unit. Connection to the pump is made via a flexible coupler. | | | | | | | | | | | | | | | | | | | | | | Type / Size | F 620 S-15 | F 620 S-30 | | | | Delivery rate Q max. | 19 m3/h | 23 m3/h | | | | Delivery head H max. | 10 m water column 12 m water column | | | | Viscosity max. | 2500 mPas (cP) | 2500 mPas (cP) | | | | Temperature max. | 100 °C | 100 °c | | | | Seal type | | mechanical seal in ceramic oxide, o-rings in FPM | | | | Material | | shaft in stainless steel 1.4571/316 Ti, seal in FPM | | | | Impeller | | conical impeller in polypropylene (version in stainless steel on request) | | | | Pump housing | 0 140 mm | 0 140 mm | | | | Part No. | | | | Immersion length 700 mm | 620 23 001 | 621 23 001 | | | | 1000 mm | 620 23 002 | 621 23 002 | | | | 1500 mm | 620 23 003 | 621 23 003 | | | | Part numbers for immersion length 300 to 3000 mm | (in steps of 100 mm) on request. | | | | | | | | | | | | | | o CN | | | | | | | | | | | | | | | | | | | | | | | | | | | | Accessories: | | | | | | | | Part No. | | | | Mounting flange in stainless steel 1.4571/316 outside 0 265 mm, pitch circle 0 225 mm, 8 bores 0 16 | Ti mm | eac | h | | | | 947 14 005 | | | | Suction strainer in stainless steel 1.4571/316 Ti | | | | | | 001 10 232 | | | | Hose connection in stainless steel, complete with nut i for hose inside diameter DN 25 for hose inside diameter DN 32 for hose inside diameter DN 38 | n | brass | G | 11/2 (BSP 1 v2" female) 959 04 002 959 04 003 959 04 004 | | | | | | | | | | | | | | | | | | | | | | | | Drive Motors for Centrifugal Immersion Pump F 620 S Three-phase motors protected to IP 55, with motor protection switch or cable lug box | | | | | | | | | | | | | | | | | | | | | Capacity | Voltage | Frequency | Nominal speed | Part No. | Part No. | | | | P2 | Version with motor protection switch | Version with cable terminal box | | | | 0,75 kW | 230/400 V | 50 Hz | 2850 rpm | 001 00 046 | 001 00 006 | | | | 1,1 kW | 230/400 V | 50 Hz | 2850 rpm | 001 00 047 | 001 00 007 | | | | 1,5 kW | 230/400 V | 50 Hz | 2850 rpm | 001 00 048 | 001 00 008 | | | | 2,2 kW | 230/400 V | 50 Hz | 2850 rpm | 001 00 049 | 001 00 009 | | | | 3,0 kW | 400 V | 50 Hz | 2850 rpm | 001 00 050 | 001 00 010 | | | | 4,0 kW | 400 V | 50 Hz | 2850 rpm | 001 00 051 | 001 00 011 | | | | Three-phase motors explosion-proof to EEx e II T3 with cable terminal box | | | | Capacity | Voltage | Frequency | Nominal speed | Part No. | Part No. | | | | P2 | Three-phase motor with cable terminal box | Motor protection switch EEx de II C T6 to be mounted on the carrying handle | | | | 0,75 kW | 230/400 V | 50 Hz | 2850 rpm | 001 00 066 | 936 06 118 | | | | 1,1 kW | 230/400 V | 50 Hz | 2850 rpm | 001 00 067 | 936 06 118 | | | | 1,5 kW | 230/400 V | 50 Hz | 2850 rpm | 001 00 068 | 936 06 119 | | | | 2,0 kW | 230/400 V | 50 Hz | 2850 rpm | 001 00 069 | 936 06 119 | | | | 2,5 kW | 400 V | 50 Hz | 2850 rpm | 001 00 070 | 936 06 120 | | | | 3,3 kW | 400 V | 50 Hz | 2850 rpm | 001 00 071 | 936 06 120 | | | | Accessories: | | | | Part No. | | | | | Carrying handle for three-phase motors up to 3,0 kW | | 001 10 504 | | | | | | | | | | | | | | | | | | | | | | F 640 PP-30 with suction strainer | | | | | | | | | | Construction Features in Detail | | | | | | | | | | flexible coupling | | | | | | | | | | drive shaft | | | | | | | | | | steel cored inner tube | | | | | | | | | | outer tube | | | | | | | | | | | | | | Carrying handle for three-phase motors up 4,0 kW Carrying handle for three-phase motors explosion-proof up to 3,3 kW | | | | | | 001 10 531 001 10 567 | | | | | | mechanical seal | | | | | | | | | | | | | | | | | | Scope of supply A complete vertical centrifugal immersion pump consists of: drive motor, pump and necessary accessories. Weight per pump: 15 - 45 kg depending on the pump size, immersion length and motor kW. | | | | | | open conical impeller closed centrifugal impeller (Z) | | | | | | | | | | | | | | 5 | | | | | | 6 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|