video corpo

Eccentric worm-drive pumps
24Pages

{{requestButtons}}

Catalog excerpts

Eccentric worm-drive pumps - 1

More than just pumps Eccentric worm-drive pumps

Open the catalog to page 1
Eccentric worm-drive pumps - 2

FLUX eccentric worm-drive pumps FLUX high viscosity liquid pumps have been tried and tested in numerous industrial sectors around the world. Three pump designs are available in differing models to meet every requirement for transferring thin to high viscosity media. All models are easy to operate and maintain. Naturally, they all carry the advanced design and safety features that users expect from FLUX. For more than 50 years we have manufactured innovative, high-quality products. Operators readily acknowledge the performance of our powerful and extremely reliable pumps. Positive...

Open the catalog to page 2
Eccentric worm-drive pumps - 3

Table of Contents FLUX eccentric worm-drive pumps type F 550 S 4 - 5 version with bearing flange FLUX eccentric worm-drive pumps type F 560 S 6 - 7 version with bearing flange FLUX eccentric worm-drive pumps 8 - 9 F 550 GS in version with planetary gear FLUX eccentric worm-drive pumps type F 560 GS 10 - 11 version with planetary gear FLUX eccentric worm-drive pumps type F 550 GS6 12 - 13 version with planetary gear FLUX eccentric worm-drive pumps 14 - 15 in horizontal version Drive motors for 16 - 17 FLUX eccentric worm-drive pumps Viscosity Chart 18 Dimensions of FLUX...

Open the catalog to page 3
Eccentric worm-drive pumps - 4

Industrial eccentric worm-drive pumps type F 550 S Version with bearing flange Recommended for transferring Thin to highly viscous, even pasty, still free flowing substances. Typical applications Transferring viscous substances from drums and/or containers. Feeding filling machines. Available drive motors Three-phase electric or compressed-air motors. Three-phase motors of 0,75 or 1,1 kW, with a speed of 930 or 700 rpm. For highly viscous, pasty substances a motor of 1,1 kW is required with a recommended speed of 700 rpm for viscosities exceeding 50.000 mPas (cP), because of the low velocity...

Open the catalog to page 4
Eccentric worm-drive pumps - 6

Recommended for transferring Thin to highly viscous, even pasty, still free flowing substances. Typical applications A pump designed to meet the specific requirements of the food, cosmetic and pharmaceutical industries. The sanitary pump type F 560 S can be stripped down in no time for cleaning and/or sterilisation. The stator housing comprises a safety bar to protect containers and to allow transfer operations from plastic inliners. 3A-Certificate for USA The F 560 S pump is available in special version with 3A-approval: ground and polished, equipped with a closed mechanical seal in...

Open the catalog to page 6
Eccentric worm-drive pumps - 7

Eccentric worm-drive pump with mechanical seal in bearing flange version, drive motors see page 16

Open the catalog to page 7
Eccentric worm-drive pumps - 8

Recommended for transferring Thin to medium viscosity liquids up to a maximum viscosity of 30.000 mPas (cP). Typical applications Liquid transfer from barrels and/or containers. The eccentric worm-drive pumps type F 550 GS are particularly lightweight and easy-to-handle, making them extremely versatile pumps. The lightest model has a weight of 5,5 kg only. The weight of the complete pump depends on the immersion length and motor assembly. Available drive motors Commutator motors or compressed air motors. An infinitely variable speed variator - also available on explosion-proof models -...

Open the catalog to page 8
Eccentric worm-drive pumps - 9

Eccentric worm-drive pumps with mechanical seal in planetary gear version, drive motors see page 17

Open the catalog to page 9
Eccentric worm-drive pumps - 10

Recommended for transferring Thin to medium viscosity liquids up to maximum 30.000 mPas (cP). Typical applications Very lightweight and easy-to-handle pump for use in the food, cosmetic and pharmaceutical industries. The sanitary pump type F 560 GS can be stripped down in no time for cleaning and/or sterilisation. The stator housing comprises a safety bar to protect containers and to allow transfer out of plastic inliners. The sanitary pump type F 560 GS is available in special version with 3A-approval: ground, polished, with a closed mechanical seal in stainless steel with sliding faces...

Open the catalog to page 10
Eccentric worm-drive pumps - 11

Eccentric worm-drive pumps in planetary gear version with mechanical seal, drive motors see page 17

Open the catalog to page 11
Eccentric worm-drive pumps - 12

Recommended for transferring Thin to high viscosity substances up to a maximum viscosity of 80.000 mPas (cP). Typical applications Very lightweight and easy-to-handle pump designed for lower capacities. Extremely smooth transfer operations with a speed of 210 or 420 rpm only. Available drive motors Single-phase AC motors with capacitor switch or three-phase motors. Scope of supply A complete eccentric worm-drive pump consists of: drive motor, pump, stator and hose connection. Technical data Values ± 10 %. Delivery rate depends on versions aval

Open the catalog to page 12
Eccentric worm-drive pumps - 13

Eccentric worm-drive pumps with mechanical seal and planetary gear version

Open the catalog to page 13
Eccentric worm-drive pumps - 14

Eccentric worm-drive pumps with bearing flange for use in horizontal version Recommended for transferring Thin to high viscosity, even pasty, still free flowing substances. Typical applications Eccentric worm-drive pumps Type F 550 TR and F 560 TR are designed for horizontal use. A base plate or a pump trolley facilitates the installation with a three-phase electric motor. This pump design is available in different versions: Type F 550 SF TR with bearing flange in stainless steel and clamp connection between outer tube and stator housing is recommended for use in pharmaceutical and food...

Open the catalog to page 14
Eccentric worm-drive pumps - 15

Eccentric worm-drive pumps type F 550 and F 560 with bearing flange for use in horizontal version Drive motors with bottom flange in other capacities on request. Accessories for drive motors see page 16

Open the catalog to page 15
Eccentric worm-drive pumps - 16

Three-phase motors 230/400 Volt, 50 Hz, with motor protection switch, without cable Part No./Weight

Open the catalog to page 16
Eccentric worm-drive pumps - 17

Drive motors for eccentric worm-drive pumps type F 550 and F 560 version with planetary gear FEM 4070 Commutator motors 230 V, 50 Hz, 5 m cable and plug Further accessories for drive motors please see special brochure FLUX ACCESSORIES.

Open the catalog to page 17
Eccentric worm-drive pumps - 18

The media listed above have to be considered as examples only, as their viscosity may change substantially due to different composition and/or other temperatures. An in-service test will provide the utmost certainty in selecting the most suitable pump type. This applies especially to „Non-Newtonian liquids", the exact viscosity of which is difficult to define and may change during pumping operation (intrinsic viscosity). FLUX sales representatives will be at your disposal for an individual demonstration.

Open the catalog to page 18

All FLUX-GERÄTE GMBH catalogs and technical brochures

  1. Flow meters

    24 Pages

  2. Pump kits

    12 Pages

Archived catalogs

  1. Mixers

    8 Pages

  2. Hand nozzle

    2 Pages

  3. flux-food

    6 Pages

  4. AdBlue

    4 Pages

  5. FLUX Motors

    40 Pages

  6. FLUX Mixers

    2 Pages