Copper and Fiber Technician’s Kit CableIQ™ Qualification Tester and SimpliFiber® Pro - Fluke Networks - #1

Text version of the page

Copper and Fiber Technician’s Kit CableIQ™ Qualification Tester and SimpliFiber® Pro Model Description CIQ-FTKSFP Copper and Fiber Technician’s Kit – includes the CableIQ (CIQ-KIT) and SimpliFiber Pro (FTK1000)* Fiber Test Kit SFSINGLEMODESOURCE SimpliFiber Pro singlemode source FT525 Video microscope Inspect fiber end-faces for the #1 cause of link failures – microscopic contamination FT120 Optical microscope Inspect fiber end-faces for the #1 cause of link failures – microscopic contamination VISIFAULT VFL to verify and locate faults NFC-KIT-BOX Fiber end-face cleaning supplies Ordering information Technical Specifications CableIQ™ Qualification Tester and SimpliFiber® Pro As an IT professional responsible for managing a hybrid copper and fiber network, you have a challenging job. You are an on-the-spot problem-solver and are always planning for future enhancements, working with both copper and fiber to seamlessly upgrade the network to higher speeds while continuously troubleshooting and optimizing the current infrastructure. To meet your growing project requirements and your shrinking personnel and budgetary resources, Fluke Networks’ Copper and Fiber Technician’s Kit provides a robust set of tools to help you expertly manage your network to keep it running smoothly – and inexpensively. The Copper and Fiber Technician’s Kit pairs CableIQ and SimpliFiber Pro to provide all the testing and troubleshooting instruments you need to: Copper • Quickly qualify bandwidth (10/100, VoIP, or Gigabit Ethernet) of any cabling link • Troubleshoot cabling performance faults such as crosstalk or impedance changes • Graphically map wiring configuration and show distance to cabling faults • Discover network devices and display device configuration (speed/duplex/pairing) • Accurately locate cables and wires using IntelliTone™ digital signaling technology • Save up to 250 test results Fiber • Quickly verify optical loss and power levels with single-port, simultaneous dual wavelength testing over six wavelengths (850, 1300, 1310, 1490, 1550, 1625) • Conduct efficient cable routing identification with SimpliFiber Pro’s FindFiber® capability • Save up to 1,000 test results and upload and manage them on your personal computer via Fluke Networks’ popular LinkWare Cable Test Management Software • Track intermittent power fluctuations with the Min/Max feature CableIQ™ Specifications Cable types supported UTP, STP, FTP, SSTP, RG6, RG59, audio, security Qualification autotests 1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax Supported tests Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection Wiremap Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects Split Pairs. Find fault Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application. Results storage Up to 250 qualification test results Power Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries Battery life 20 hours of typical use, without backlight Other battery types supported 4AA photo lithium, NIMH, NICAD Dimensions and weight 7 in x 3.5 in x 1.75 in (17.8 cm x 8.9 cm x 4.5 cm) 1.2 lb (0.55 kg) *The FTK1000 is a multimode verification kit and includes a multimode source and power meter.