Volute Pumps SIHISuperNova ZLIC 040160 . . . 150200
8Pages

{{requestButtons}}

Catalog excerpts

Volute Pumps SIHISuperNova ZLIC 040160 . . . 150200 - 1

Volute Pumps SIHISuperNova ZLIC 040160 . . . 150200 Tech_cat_ZLIC_Eng.doc 06/05 TECHNICAL DATA Output: max. 280 m³/h Head: max. 60 m Speed: max. 3600 rpm Material: grey cast iron: 0B, 0C stainless steel: 4B Temperature: mat. design: 0B, 0C, 4B max. 120 °C Casing pressure: PN 16 / PN 10 1) Shaft seal: standard mechanical seal Flange connections: DIN 2501 PN 16 Sense of rotation: clockwise, when looking at the pump from the drive end APPLICATION Volute pumps of the series ZLIC in inline design have been constructed as space saving and easy to install pumping units with standard motor. The pumps are used when clear resp. turbid liquids without any solid particles have to be pumped without problem. The combination of: - performance and connection size according to DIN 24255 /EN 733 and additional size DN 25 - construction type: INLINE design with standard motor - material: grey cast iron, stainless steel - casing: inline or volute casing (see list ZLK) was leading to widely spread application fields like steel, machine and automobile construction food and semi-luxuries industry chemical and petrochemical industry pharmaceutical industry lacquer industry plastics and rubber industry iron and non-ferrous metal industry paper and pulp-industry textile industry DESIGN Single-stage resp. two-stage pumping units in compact design with nominal performances according to DIN 24255 / EN 733 as well as additional size DN 25, where suction and discharge branch are arranged opposite to direct installment into the pipework. There is no common shaft for motor and pump. The motors used are of the standard type listed. Thanks to the process design it is possible to withdraw the whole insert unit without removing the casing of the pump from pipework. By means of the unit construction system of the additional size DN 25 the single-stage and the two-stage design have the same dimensions. The performance of the pump is optimally adapted to the service point by mounting and dismounting of a stage. The individual shafts of the unit connected by a plug-in coupling facilitate the dismantling or the replacement of the motor without affecting the pump. The programme comprises. 15 pump sizes at present. 1) For size 150200 only CONSTRUCTION Casing pressure: Material design 4B max. 16 bar from -40 °C to 120 °C 0B, 0C max. 16 bar from -30 °C to 120 °C Please note: Technical rules and safety regulations. Casing pressure = inlet pressure plus delivery head + zero flow Flanges location: Suction and discharge flange radially arranged opposite to each other. Flanges: The flanges correspond to DIN 2533 PN 16. Flange drilled ANSI 150 lbs. on request. Hydraulic: First hydraulic. Designation of this construction type: A. Second hydraulic. Designation of this construction type: B. Bearing: Two grease-lubricated antifriction bearings according to DIN 625 in the motor, one antifriction bearing grease-lubricated for service-life according to DIN 625 arranged in the bearing bracket. Designation of this construction type: .K, .V Sense of rotation: Clockwise when looking at the pump from the drive end. Shaft sealing: The shaft sealing is a single mechanical seal, flushed from internal source, uncooled and unbalanced. Designation AAE: cast chrome / carbon, O-rings Perbunan temperature range: -40 °C to 120 °C Designation BH3: SiC / carbon, elastomer EP temperature range: -20 °C to 120 °C Designation BHS: SiC / SiC, elastomer Viton temperature range: -20 °C to 120 °C

Open the catalog to page 1
Volute Pumps SIHISuperNova ZLIC 040160 . . . 150200 - 2

Designs are subject to amendment without prior notice. © (Sterling Fluid Systems BV) 2005 Material design Material Execution Item Components EN US denomination materialnumber EN materialdenomination DIN materialnumber DIN materialdenomination ASTM Standard AISI 0B 0C 4B 10.10 EN-JL 1040 EN-GJL 250 0.6025 GG 25 A 278 Class 30 X X 16.10 Volute casing Casing cover 1.4408 GX5CrNiMo19-11-2 1.4408 GX6CrNiMo18 10 A 351 CF8M 316 X 34.00 Bearing bracket EN-JL 1040 EN-GJL 250 0.6025 GG 25 A 278 Class 30 X X X 1.4021 X20 Cr13 1.4021 X20 Cr13 A 276 Type 420 420 X X 21.00 Shaft 1.4401 X5CrNiMo18 10...

Open the catalog to page 2
Volute Pumps SIHISuperNova ZLIC 040160 . . . 150200 - 3

Designs are subject to amendment without prior notice. © (Sterling Fluid Systems BV) 2005 Sectional drawing and nomenclature 10.10 volute casing 21.00 shaft 16.10 casing cover 34.00 bearing bracket 43.30 mechanical seal 23.00 impeller Standard set of components / bearing bracket - plug coupling / standard motor* / space requirement By supplementing the standard set of components consisting of pump casing, casing cover, impeller and mechanical seal by a special bearing bracket (DBP) results an inline pumps which is easy to combine. The bearing bracket removes the standard motor from the load...

Open the catalog to page 3
Volute Pumps SIHISuperNova ZLIC 040160 . . . 150200 - 4

Designs are subject to amendment without prior notice. © (Sterling Fluid Systems BV) 2005 Performance graph n = 1450 rpm Q [m³/h] Q [m³/h] H [m] H [m] H [ft] H [ft] n = 2900 rpm

Open the catalog to page 4
Volute Pumps SIHISuperNova ZLIC 040160 . . . 150200 - 7

Designs are subject to amendment without prior notice. © (Sterling Fluid Systems BV) 2005 Data regarding pump size Type Pump size Hydraulic + Bearing Shaft sealing Material design Casing seal A First hydraulic AAE: Standard mechanical seal, 0B: Main parts of cast iron 2: Confined flat B Second hydraulic O-rings Perbunan GG25. gasket of EWP 210. K, V Two grease-lubricated BH3: Unbalanced mechanical 0C: Main parts of cast iron antifriction bearings in seal, SiC-Carbon, GG25, Bronze G-CuSn10 4: Confined flat the motor. elastomer EPDM bellows. gasket of One grease-lubricated 4B: Main parts of...

Open the catalog to page 7
Volute Pumps SIHISuperNova ZLIC 040160 . . . 150200 - 8

Designs are subject to amendment without prior notice. © (Sterling Fluid Systems BV) 2005 COPYRIGHT WARNING Please read this notice The material you are viewing in this document is protected by Copyright and may only be used in accordance with Copyright, Designs and Patent legislation. It is not permitted to copy - either in full or in part - nor substantially extract, reproduce or re-use any of the contents of this document in any material form or in any medium without permission from the Copyright holders or their assignees. Any unlawful use of the material in this document may result in...

Open the catalog to page 8

All Flowserve SIHI Pumps catalogs and technical brochures

  1. PL 325 M

    14 Pages

  2. LPG Solutions

    12 Pages