Flowrox Progressive Cavity Pump, Series C - Flowrox Oy - #1

Text version of the page

04/12 Progressive Cavity Pump, C-series The Flowrox progressive cavity (PC) pumps’ C-series is designed for the most demanding industrial slurry and paste pumping applications. Due to its unique features and patented design, high efficiency and high pressure are achieved with a short construction. It is easy to install and requires less energy and maintenance resulting in very low Total Cost of Ownership (TCO). TECHNICAL DATA SHEET Benefits and Features • • • • • General The Flowrox C-series progressing cavity pumps were conceived by utilizing Flowrox’s extensive experience in progressing cavity pump service and spare parts production as well as the knowledge gained from our innovative peristaltic pump range. Flowrox is the industry benchmark for abrasive, corrosive and other demanding shut-off, control and pumping applications. Benefits The precise 2/3-lobe rotor and Spiral stator technology allows a rigid and tighter pumping unit, which enables 10 bar pressure per stage and excellent efficiency. With this revolutionary technology, higher output is achieved with lower rpm cycles of the rotor. Lower cycles lead to lower friction and wearing of rotors and stators. Easy installation, usage and maintenance have been taken into account in pump’s structure, e.g. the direction of pump’s suction connection can be adjusted stepless and change of seals is quick and easy. The direction of the pump’s suction connection can be adjusted over 180 degrees and change of sealing mechanics is quick and easy. Low life cycle costs (TCO) [EUR/m3] High efficiency Higher pressure due to 1-stage construction (10 bar) Easy and quick installation - Over 180º stepless adjustment of the suction flange direction User-friendly and easy maintenance - Long service interval - Quick replacement of the mechanical shaft seal Applications • • • • • • • • • • • • • Pulp and paper Mining and Minerals Chemical / Biochemical Industry Energy and Environment Oil and Gas Dyeing industry Water and waste water treatment Food, brewery and beverage industry Sugar Industry Wood Processing Construction Industry Agricultural Industry and solutions Other industrial solutions With Flowrox PC pump’s built-in advantages the customer’s actual savings both in energy consumption and in installation as well as maintenance costs result in the total cost of ownership decreasing and higher plant availability. Patented Technology The most common failure in pumps is caused by problems in shaft sealing. Flowrox utilizes a one of a kind, patented main seal removal system allowing the mechanical shaft seal to be replaced quickly and without dismantling the entire pump. Spiral stator allows higher pressure per stage 2/3-lobe elliptic rotor allows higher flow rate