Text version of the page

Quad Series Turbine Flow Sensor

Provides Bi-directional Flow Rate Measurement

SPECIFICATIONS

Performance Forward and Reverse Flow Accuracy: Operating Pressure: ±1% of full scale 5000 PSI (345 Bar) maximum Self-generating alternating pulse 100 mV RMS (100 Hz) minimumMaterial Repeatability: Pressure Drop: Electrical Output Signal ±0.2% See P charts on page 24 Turbine Response: Fluid -4 to +300 °F (-20 to +150 °C) Ambient -4 to +131 °F (-20 to +55 °C) Magnetic Pick-up: 200ms Temperature: Housing: 6013-T651 Aluminum; anodized Turbine Rotor: T416 Stainless steel Ball Bearings: 440C Stainless steel Rotor Shaft: T303 Stainless steel Rotor Supports: Hub Cones: 6061-T6 Aluminum alloy 6061-T6 Aluminum alloy FSC-2005, 2075 CA360 Brass Retaining Rings: Steel; zinc plate Seals: Buna N standard; Viton Body 12L14 steel; black oxide nish Nut 12L14 steel; zinc plate, dichromate nish Ports: SAE J1926/1 Four ow ranges• Bi-directional turbine ow measurement • High strength aluminum bodies • Flow accuracy ±1% of full scale for both • forward and reverse ow Repeatability ±0.2%• Pressures up to 5000 PSI (345 Bar)• Temperatures up to 300 °F (150 °C)• Derived from the FSC Series, the F2000 Quad Series of ow sensors utilizes two ow transducers which are 90-degrees electrically out of phase from each other. With the addition of a second ow transducer, it is possible to monitor ow in both directions. The F2000 Quad is suitable for up-down counters that can discern the leading and trailing edges of the quadrature signals.Current applications include using the F2000 as a speed-sensing device on mobile equipment. This bi-directional ow sensor can be used as a governor, sending frequency signals back to a PLC which enable it to make the necessary adjustments. Other functions of the ow sensor are in linear applications where accurate positioning is required.
® and EPR optional Magnetic Pick-ups:
Viton is a registered trademark of DuPont Dow Elastomers.

22

Tel 800-433-5263

RELIABLE FLOW MEASUREMENT