Text version of the page

Applications • Remote flow meter monitoring• Totalizing • Alarm processing • Process control

Flo-Tech - 11805 Digital Display

For Flo-tech Activa

TM

Sensor Arrays Series F6700 (AC) and F6750 (DC) - Accepts standard 4-20mA or 0-10 VDC analog signal

The F6700/F6750 series digital display with integrated signal processor accepts a 4-20 mA signal from Flo-tech’s Activa Sensor Array as well as any other 4-20 mA or 0-10 VDC source. These 5-digit displays can be scaled to most engineering units and are easily programmed using the front panel buttons or available programming software. To meet your specific requirements, each display accepts up to three optional plug-in cards. One card for each of the following function types can be installed in each display: Analog Outputs – A linear DC output signal card will be set up to provide either a 4-20 mA, 0-20 mA or 0-10 VDC signals and can be scaled independent of the input range.

Features

Communications – Optional plug-in cards to facilitate digital communications include: RS232, RS485, Modbus, Profibus and DeviceNet.

• 5-digit rate display• 5-digit totalizer with 4-digit overcarry • Dual inputs, 4-20 mA or 0-10 VDC • Built-in transmitter power supply • Three plug-in card slots • Optional setpoint alarm cards • AC and DC powered versions • NEMA 4X / IP65 rated • CE Compliant

Setpoint Alarms – Select from dual FORM-C relays (5 Amp), quad FORM-A relays (3 Amp) or either sinking or sourcing quad open collector logic outputs.The analog output and communication cards will be installed by the factory at time of order, or they may be installed by the customer at a later date. The setpoint alarm cards are available for customer installation and setup only.

SPECIFICATIONS: Display: 5-digit, 0.56" sunlight-readable red LED Power: AC 85 to 250 VAC, 50/60 Hz, 15 VA DC 11 to 36 VDC, 11 W A/D Converter: 16-bit resolution A/D Conversion Rate: 20 readings/sec Display Update Rate: 1 to 20 updates/sec Sensor Inputs: 4 to 20 mA or 0 to 10 VDC Transmitter Power: 24 VDC, ± 5%, regulated 50 mA max Totalizer Time Base: Second, minute, hour or day Total: 9 digits, display alternates between high order and low order readouts

MAXMIN TOT 1.95(49.5)

Linearization DataPoint Pairs:

SP1 SP2 SP3 SP4

Selectable from 2 to 16

DSP PAR F1 F2 RST

Operating Temperature: +32 ° F to +122 ° F (0 ° C to +50 ° C)

3.80(96.5)

(+32 ° F to +113 ° F with all three plug-in cards installed)

Ordering Information: Power Display Analog Output Communications Display Units AC F6700 4-20 mA – A RS232 – A GPM – G DC F6750 0-20 mA – B RS485 – B LPM – L 0-10 VDC
4.1(104.1) 0.10(2.5)1.75(44.5) – C Modbus – C RPM – R None – X Profibus – D psi – P DeviceNet Panel cut-out Inches (mm) – E bars – B None 3.62
+.03-.00 +.8 -.0 – X kg/cm
2 – K MPa (92 )
+.02 -.00 – M 1.77 (45 )
+.5 -.0 Note: Select one option from each category ° F – F Form C Relay Plug-in Option Card - Part Number F6542 This optional plug-in card requires customer installation and setup. To facilitate setup, it is recommended that this feature be utilized with a display that includes a serial communication card (RS232 or RS485) and programming software. ° C – C Note: For additional setpoint alarm options, consult factory for information. Ordering Examples:F6700-X-X-G = AC powered, displays GPM F6700-A-A-L = AC powered + 4-20 mA Out + RS232, displays LPM F6750-C-X-B = DC powered + 0-10 VDC Out, displays bars 2

TEL. 1-800-433-5263 www.flo-tech.com

TM