Text version of the page
Text version of the page
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduction | | | | | | | | | | XS XL XLP XM XMP XH XK XB GR CS XC XF | | | | | | System description The XT conveyor is a twin-track, flexible plastic chain pallet conveyor. The system is especially well suited for manual and automatic assembly and test systems in the automotive and electrical/electronics industries. The modular concept allows simplified engineering and ordering, as well as fast configuration together with plug and play capabilities for improved productivity. Examples of application areas Manual and automatic assembly and test systems in the automotive and electrical/electronics industries. Examples: gearboxes, computers, sewing machines, mobile phones, automotive industrial seat guiderails, eyeglasses, injection-moulded parts, fishing reels, car instrument kits Module concept The standard modules can be split into seven groups -industrial conveyors, workstations, transfers, stops, locates, lift-and-rotates and supports. Each module is quickly adaptable and reusable for future demands and can easily be integrated with FlexLink's large range of single strand pallet conveyor systems. | | | | | | Pallets The FlexLink standard chain and integrated guide rails system allow for accumulation through the entire system, including bends, as well as easy and straightforward integration of stops, locate stations as well as transfer units with a minimum of controls. System data • 25 m maximum conveyor length • 20 m/min maximum conveyor speed • Standard pallet sizes from 240x240 mm up to 640x640 mm, including rectangular sizes • 30 kg maximum pallet weight (8 kg pallet weight/ 100 mm conveyor | | | | | | | | | | | | | | 250 kg maximum accumulated weight at 5 m/min. FST | | | | | | | | | | Typical noise levels During normal conditions a noise level below 65 dB(A) can be obtained in an XT conveyor system, including transfers, stops, etc. However, be aware that the pneumatic components (valves, etc.) very much affect the noise level if they are not enclosed correctly. Also, throttle valves must be adjusted correctly at transfers, stops, etc. The following table shows typical noise levels. | | | | | | XMY | | | | | | | | | | XLX | | | | | | | | | | XMX | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Speed m/min. | 5 | 10 | 15 | 20 | 30* | | | | dB(A) | 56 | 58 | 61 | 65 | 70 | | | | | | | | | | | | | | | | | GRX | | | | | | | | | | | | | | *No standard speed | | | | | | | | | | APX | | | | | | | | | | IDX | | | | | | | | | | © FlexLink" | | 195 | | | | | | Introduction | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|