Lift-and-locate unit

Lift-and-locate unit

132482 46,5PW–95 0 100080060040020050100150 mm N Distance from pallet centre to point where load is applied Maximum load Lift-and-locate unit

XTPX P12 “PW×PL”

The lift-and-locate unit consists of a plate which can be elevated by a industrial pneumatic cylinder. The plate has two locating pins. The unit can be delivered with top plates adapted for the 15 standard pallet sizes.Max lift force at centre (0,6 MPa): 1177 N Lift height: 0–225 mm (adjustable)Locating repeatability in x and y directions: ±0,05 mmNote (applies to option F01). In order to avoid influence from conveyor movements, attach the conveyor to a ref-erence support. When ordering, insert the pallet size instead of “PW×PL” in the designation. Example: XTPX P12 320×320. This product is available for all XT pallet sizes.For more information, see “Lift-and-locate function mod- ule” on page215.Two types of support frame are available, S20 and S21, for different mounting options. It is recommended to enclose the unit to protect per-sons from the clamp risk.

Support frame S21 Support frame S20

PW 225 XCBL ...×44 ∅ 68 Support frame S21

XTUF S21 “PW”

H1 When ordering, insert the pallet width instead of “PW” in the designation. Example: XTUF S21 320.
25515137 245 Support frame S20

XTUF S20 “H1”

When ordering, insert chain surface height above floor level instead of H1 in the designation.Example: XTUF S20 570. 232
Lift-and-locate unit