Pneumatic transfer units (continued)

Pneumatic transfer Type L

7 Transfer unit Type 240 V 50 Hz motor 115 V 60 Hz motor
14 XTPT 480×400–... L S9R40GXH-T S9R40GEH-T XTPT 480×480–... L S9R40GXH-T S9R40GEH-T XTPT 480×640–... L S9R40GXH-T S9R40GEH-T
277 XTPT 640×400–... L S9R40GXH-T S9R40GEH-T XTPT 640×480–... L S9R40GXH-T S9R40GEH-T XTPT 640×640–... L S9R40GXH-T S9R40GEH-T
Pneumatic connections ∅ 6mm (4×) W Connectors for proximity switches M8 (4×)Connector for motor cable(1-phase) Throttle valves (4×) Scope of delivery Throttle valves (4×)5/3 valveMid position pressurized C-C L

Pneumatic transfer Type L*Standard chain, 50 HzStandard chain, 60 HzConductive chain, 50 Hz Conductive chain, 60 Hz

XTPT “PW×PL”-01XTPT “PW×PL”-02XTPT “PW×PL”-03XTPT “PW×PL”-04

14 24 12 315

When ordering, insert the pallet size instead of “PW×PL” in the designation. *For the following pallet sizes (PW×PL): 480×400: C-C=370, W=405, L=439480×480: C-C=450, W=405, L=519480×640: C-C=610, W=405, L=679640×400: C-C=370, W=565, L=439640×480: C-C=450, W=565, L=519640×640: C-C=610, W=565, L=679 Motor cable connectorThe connector for motor cable is a male 3-pole insert with a housing for the insert. To connect, a female 3-pole insert with a hood for the insert and a screw cap for the hood are required (not supplied by FlexLink). Suitable types are Weidmüller 1498200000 (insert),1788520000 (hood), and 13-08080521 (M20 screw cap), or equiva-lent. 230

Pneumatic transfer units