XT function modules (continued)

Stop function module P11 Lift-and-locate function module XTUL P12

The lift-and-locate function is used when a product needs to be located at a specific height prior to a machine oper-ation. The device can be mounted in three ways (options F00–F02).

Stop function

A B

50 D = D00 D = D01 D = D02 PW PL

Lift-and-locate module (option F00)

125132 46,5 PL–20 PW–95 475 181 Stop function

XTUS P11 ...

Height adjust-mentLocating pin Singulates and stops one pallet at a time along the con-veyor line with a repeatability of

±

1 mm. The stop units can be mounted on the opposite side of the beam to facilitate pallet stopping at the front end of the pallet.Configuration: see page216. Included in the delivery: •The necessary number of stoppers and sensor brack-ets, based on the option selected.•The necessary mounting hardware required for attachment to an XT or XT Compact conveyor.
181 45 46,5 115 M8 (4x) 140 Lift-and-locate function module

XTUL P12 ... F00 ...

Option F=00: Module is attached to horizontal surface.Configuration: see page216. 214
XT function modules