| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Fixed guide rail brackets (continued) | | |
| | | |
| | | Fixed guide rail bracket, aluminium (XS, XL, XM, XH, XB) | | |
| | | Distance piece (aluminium) for conveyor system XK | | |
| | | |
| | | |
| | | XS XL | | |
| | | 6,25 | | |
| | | | | |
| | | 4 | | | 4 | | |
| | | -W | | |
| | | 31 | | |
| | | |
| | | | |
| | | |
| | | 30 | | |
| | | |
| | | |
| | | |
| | | r 42 | | |
| | | XLP XM XMP XH XK XKP XB | | |
| | | 67 | | |
| | | |
| | | |
| | | Distance piece (aluminium) for conveyor system XK Thickness 6,25 mm XLRD 6 C Suitable, longer T-bolts: see Fasteners. Note. Must be ordered in multiples of 10 | | |
| | | |
| | | B | | |
| | | XM, XH:8 | | |
| | | |
| | | |
| | | 13 | | |
| | | |
| | | XM, XH, XB | | |
| | | XS, XL | | |
| | | |
| | | |
| | | |
| | | Distance piece (polyamide) | | |
| | | |
| | | Fixed guide rail bracket W=16 mm Fig. A W=28 mm Fig. A W=40 mm Fig. B W=49 mm Fig. B W=53 mm Fig. B W=65 mm Fig. B W=90 mm Fig. B | | |
| | | XLRB XLRB XLRB XLRB XLRB XLRB XLRB | | 16x42 28x42 40x42 49x42 53x42 65x42 90x42 | | |
| | | ^6,25 | | |
| | | |
| | | 20 | | |
| | | 16 | | |
| | | |
| | | |
| | | |
| | | 34 | | |
| | | |
| | | GR | | |
| | | |
| | | |
| | | |
| | | |
| | | Distance piece (polyamide) Thickness 6,25 mm XLRD 6 P Can hold angle plates (XL only) Not for conveyor system XK (use XLRD 6 C). Suitable, longer T-bolts: see Fasteners. Note. Must be ordered in multiples of 10 | | |
| | | Note. All brackets except 16 mm and 28 mm types can take angle plates when used with XM and XH conveyor. (XLRB 40x42: angle plate XLRP 3/6 only). Although XLRB ..x42 can be used with XB industrial conveyors, the resulting height of the guide rail is often insufficient for safe guidance, especially for the wider brackets. Use adjustable polyamide brackets or built-up brackets if type XLRB ..x54 are not suitable. Mounting to beam: XLAT17, XLAN 8, BRB 8,4x16. | | |
| | | CS XT XC XF FST XMY XLX XMX XHX GRX CSX | | |
| | | |
| | | |
| | | | | | | | | | Spring pin for guide rail bracket | | | | | s | | | | Spring pin for guide rail bracket | XLAP 28 | | | | The spring pins are used to secure the guide rails to the guide rail brackets. | | | | Note. Must be ordered in multiples of 50 | | | | | | | | | |
| | | Distance piece (aluminium) | | |
| | | |
| | | Distance piece (aluminium) Thickness 6,25 mm XLRD 6 Not for conveyor system XK (use XLRD 6 C). Suitable, longer T-bolts: see Fasteners. Note. Must be ordered in multiples of 10 | | |
| | | |
| | | |
| | | |
| | | APX IDX | | |
| | | |
| | | © FlexLink" | | 171 | | |
| | | Fixed guide rail brackets | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |