| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Support components tor in-line transfer drive units | | |
| | | |
| | | In-line transfer drive units include a special arrangement for connecting beam support brackets Instead of connecting the brackets directly to the T-slots in the beams, intermediate U-shaped brackets are used. These brackets are included with the transfer units. See figure. Support legs to the transfer must be 82,5 mm shorter than other legs connected along the conveyor. Use M6S 8x16 screws instead of XLAT 17 when attaching the beam support bracket to the U-shaped brackets. Read more about beam support brackets on page 35. | | |
| | | |
| | | | | |
| | | |
| | | | | |
| | | End drive unit H. guided chain, slip clutch | | |
| | | |
| | | End drive unit Direct drive with guided chain. Mo slip clutch. Maximum traction torce: up to 1250 N. See page 17. Fixed speeds up to 63 m/min. Variable speed up to 63 m/min. Motor on left side: | | |
| | | End drive unit Direct drive with guided chain. Adjustable slip clutch. Maximum traction force: up to 1250 N. See page 17. Fixed speeds up to 63 m/min. Variable speed up to 63 m/min. | | |
| | | |
| | | Motor o | | left s | | |
| | | |
| | | |
| | | Motor on right side (not shown): | | |
| | | Motor on right side (not shown): | | |
| | | |
| | | |
| | | ' Use online configurator when ordering. Effective track length: 0,80 m | | |
| | | * Use online configurator when ordering. Effective track length: 0,80 m | | |
| | | |
| | | |
| | | © FlexLink' | | 25 | | |
| | | X85 conveyor system | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |