H6600 Controller - 2 Pages

BULLETIN 10024
North American ---------bu200
Manufacturing Company, Ltd.
GUIDING SYSTEMS GROUP September 2000
H6600 Series Electronic Controllers
Microprocessor-based
Simplified, menu-driven setup
Adaptable inputs accept wide range of transducers
■ Alarm output for system faults
■ Remote offset capability
■ Bar graph meter indicates position of material in detector or amplifier output voltage.
The microprocessor-based H6600 series of electronic controllers provides all functions necessary to accommodate a wide range of guiding applications, while maintaining a simple, menu-driven, set-up. It accepts all of North American's detectors: edge guide, center-guide, ultrasonic and roll center, plus most off-the-shelf transducers. The controller will directly drive an electro-hydraulic servo valve or the input of a power amplifier for electro-mechanical applications.
The H6600's microprocessor simplifies setup by configuring the detector inputs based on menu selections from the front panel. No additional equipment or expertise is required. System gain and zero are also straight-forward front panel adjustments. Gain may be adjusted at any time, either in AUTO or MANUAL. Setting system ZERO (initial guidepoint) is done by simply placing the strip at the desired guide position and pressing the ZERO key. (Note: This function is inhibited while the system is in AUTO.) To avoid tampering, the keyboard may be "locked-out"; a special keystroke sequence re-enables it.
The H6600 is available in several versions, offering automatic detector self-seek and stagger-wind capabilities for recoiling applications.
H6600 Controller
  1. P. 1

  2. P. 2

    Bulletin 10024/2.00Page 2 ח ח >
Text version

All Fives North American Combustion, Inc. catalogues and technical brochures

  1. Turbo Blowers

    6 Pages

    En

Archived catalogues

  1. Turbo Blowers

    4 Pages

    En
  2. Butterfly Valves

    4 Pages

    En