catalogue search
P. 01
|
You may also be interested in
Converter, Ethernet converter, Lighting driver, Motion control card, LED driver
Text version of the page
| | ||||||||||
| Datasheet | ||||||||||
| | ||||||||||
| With this board, an operator is able to manually control 3 motors (axes) for a positioning system. Each motor is driven with an Ethernet motion control device (like FMod-IPECMOT 48/10). Thanks to the Ethernet the installation costs and time are highly reduced, and the distance between the remote control and the motors can range from some centimeters up to several kilometers. Each motor is connected to an Ethernet motion control device, and these 3 devices are remotely controlled from an unique FMod-IPAXESCTRL board. The positions of the axes are displayed on a LCD, while the new position goals can be sent moving an XY trackball or pressing buttons on a small keyboard. | ||||||||||
| | ||||||||||
| Dimensions | ||||||||||
| | ||||||||||
| 76 x 71 x 20 mm | ||||||||||
| | ||||||||||
| Power supply | ||||||||||
| | ||||||||||
| DC [7-48V], 1.5W (with LCD, trackball and keyboard) on external power connector, or Power Over Ethernet [PoE, IEEE 802.3af] on RJ45 connector. | ||||||||||
| | ||||||||||
| Communication interface | ||||||||||
| | ||||||||||
| Hardware: Protocol: Software: | Ethernet 10BaseT [RJ45] TCP-IP & UDP + command encapsulation Web server on board, integrated webpage (Html+Java). | |||||||||
| | ||||||||||
| Connection diagram | ||||||||||
| | ||||||||||
| USER | INTERFA CE | CONTROL | COMMUNICATI ON | REGULATION | APPLICATI ON | |||||
| | ||||||||||
| FMod-IPDCMOT48/l | ||||||||||
| | ||||||||||
| FMod-IPAXESCTRL | Standard Ethernet switch | FMod-IPECMOT 48/10 | ||||||||
| | ||||||||||
| Output | LCD | |||||||||
| | ||||||||||
| DCMotor / Axis 1 | ||||||||||
| | ||||||||||
| Input | ||||||||||
| | ||||||||||
| Keyboard | DCMotor / Axis 2 | |||||||||
| | ||||||||||
| Input | Ex: XXYZ-Table | |||||||||
| Trackball | Wordwide Computer Interna Configuration & Control | DCMotor / Axis 3 | ||||||||
| | ||||||||||
| Man-Machine interface (MMI) | ||||||||||
| | ||||||||||
| Input devices: TRACKBALL: 2 independent axes (quadrature signals). The user can use this device to manage 2 axes (X &Y) independently and at the same time. KEYBOARD: 1 to 16 keys matrix keypad (2x4 or 4x4). Each key of the keyboard can be configured for a specific function. (Axis+/-, Zoom, Activate, Go/Save position, Stop/Free axes,...) Output devices: LCD: 4 lines x 20 characters as display. LED: (4x) to display MODE and STATUS of the board. | ||||||||||
| | ||||||||||
| Where to find more information_ Please download the user manual at the following address: http://www.fiveco.ch/section motion/support motion E.htm | ||||||||||
| | ||||||||||
| 211207/2.3 All specifications may change without any notification. | 1/1 | |||||||||
| | ||||||||||
| Ch. de la Rueyre 116 / 1020 Renens / Switzerland Tel +41 21 6938671 / Fax +41 21 6938670 | www.fiveco.ch info@fiveco.ch | |||||||||
| | ||||||||||