Catalogs >
FISHER REGULATORS >
Type 1367 High-Pressure Instrument Supply System with Overpressure Protection

Type 1367 High-Pressure Instrument Supply System with Overpressure Protection
4Pages

Catalog excerpts

Type 1367 High-Pressure Instrument Supply System with Overpressure Protection - 1

Type 1367 High-Pressure Instrument Supply System with Overpressure Protection Figure 1. Type 1367 High-Pressure Instrument Supply System The Type 1367 high-pressure instrument supply system takes a pressure of up to 2000 psig /138 bar and reduces it to a controlled pressure to be used for supplying a pneumatic instrument. This system consists of the following filters, regulators, and relief valves: • A Type 252 extended body filter with drain valve. • A first-stage Type 1301F regulator with mounting bracket for an actuator yoke or casing. • A Type H120 relief valve mounted in the side outlet of the Type 1301F regulator. • A second-stage Type 67CF filter-style regulator, mounted on the Type 1301F regulator. • A Type H800 orH120 relief valve nipple-mounted in the outlet of the Type 67CF regulator. • Regulation and Overpressure Protection in One Complete Package — This system provides two-stage pressure reduction with a non-adjustable relief valve matched to each regulator. • Installation Flexibility — The Type 1367 system can be ordered for mounting on either the yoke or • NACE Capabilities — For sour gas applications, the Type 1367 system is available in materials that comply with the recommendations of NACE • Capability for Continuous Moisture Removal — The drain valves can be removed from both the Type 252 filter and the Type 67CF filter-style regulator, and tubing installed to provide continuous drains. Process Management

Open the catalog to page 1

Type 1367 High-Pressure Instrument Supply System with Overpressure Protection - 2

Connection Size Type H800 Vent: 1/2 NPT with removable screen Fixed Relief Setting of Type H120 Relief Valve Outlet (Supply) Pressure Range Maximum Outlet (Supply) Pressure with Type 67CF Regulator Failed Wide-Open with: Type H800 Relief Valve Relieving: 50 psig / 3.4 bar Type H120 (Second Stage) Relief Valve Relieving: Construction Materials Body Material: Aluminum or Stainless steel Filter Cartridge: Polyethylene Drain Valve: 316 Stainless steel Body and Spring Case: Brass or Stainless steel Disk: Polytetrafluoroethylene (PTFE) Gaskets: Neoprene (CR) and Fluorocarbon (FKM) All Other...

Open the catalog to page 2

Type 1367 High-Pressure Instrument Supply System with Overpressure Protection - 3

Bulletin 71.1:1367 TYPE H800 TYPE 1301F TYPE 67CF TYPE HIGH INLET PRESSURE 252 ATMOSPHERIC PRESSURE INITIAL STEP-DOWN PRESSURE, 100 psig / 6.9 bar TYPE H120 RELIEF VALVE NOT SHOWN HIGH INLETINLET PRESSURE PRESSURE, 10 to 70 psig / 0.69 to 8.4 bar HIGH PRESSURE FINAL OUTLET ATMOSPHERIC PRESSURE ATMOSPHERIC PRESSURE RELIEF PRESSURE INITIAL STEP-DOWN PRESSURE, 100 psig / 6.9 bar INITIAL STEP-DOWN PRESSURE, 100 psig / 6.9 bar FINAL OUTLET PRESSURE, 10 to 70 psig / 0.69 to 8.4 barto 70 psig / 0.69 to 8.4 bar FINAL OUTLET PRESSURE, 10 RELIEF PRESSURE RELIEF PRESSURE TYPE 1301F TYPE H120 TYPE 67CF...

Open the catalog to page 3

Type 1367 High-Pressure Instrument Supply System with Overpressure Protection - 4

Bulletin 71.1:1367 9.9 / 251 9.9 / 251 4.93 / 125 4.93 / 125 1.15 / 29 1.15 / 29 9.22 / 234 9.22 / 234 2.00 / 51 2.00 / 51 2.00 / 51 1.75 / 44 A7036 INCHES / mm TYPE H120 RELIEF VALVE NOT SHOWN FIRST STAGE TYPE H120 RELIEF VALVE NOT SHOWN Figure 3. Dimensions Industrial Regulators Natural Gas Technologies TESCOM Emerson Process Management Regulator Technologies, Inc. Emerson Process Management Regulator Technologies, Inc. Emerson Process Management Tescom Corporation USA - Headquarters McKinney, Texas 75069-1872, USA Tel: +1 800 558 5853 Outside U.S. +1 972 548 3574 USA - Headquarters...

Open the catalog to page 4