| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | ASSEMBLY TOOLS FOR CRIMP CONTACTS (fa . . TOOLS AND HIGH VOLTAGE CONTACTS FVs C h e r | | |
| | | |
| | | Contact Insertion Tool | | |
| | | |
| | | | | | | | | | Contact Dia. | Part Number | | | | 0.5 | TX00.214 | | | | 0.7 | TX00.210 | | | | 0.9 | TX00.211 | | | | 1.3 | TX00.273 | | | | | | | | | |
| | | |
| | | Tool for inserting male and female removable, crimp contacts into the contact block. Especially recommended for small gauge and fragile wires. | | |
| | | |
| | | Material - Handle: POM (black Delrin®) | | |
| | | |
| | | | | | | | | | Contact Dia. | Part Number | | | | 0.5 | TX00.213 | | | | 0.7 | TX00.200 | | | | 0.9 | TX00.205 | | | | 1.3 | TX00.212 | | | | 1.6 | TX00.201 | | | | | | | | | | | | | | | | Coax Insert No | Part Number | | | | E22 200.48 E22 200.49 E22 200.55 E22 200.56 | TX00.275 | | | | E22 200.71 E22 200.72 | TX00.274 | | | | | | | | | |
| | | Contact Extraction Tool | | |
| | | |
| | | |
| | | |
| | | Tool for extracting male and female removable, crimp contacts from the contact block. | | |
| | | |
| | | The sleeve of this tool is pushed over the contact, thereby releasing the contact retaining mechanism. The tool plunger is then pushed to eject the contact. | | |
| | | | | POM (black Delrin®) Stainless Steel Tool Steel | | |
| | | |
| | | |
| | | |
| | | Length: 75 mm Inside thread: M3 Material: Stainless Steel | | |
| | | |
| | | Assembly Tool for female contacts with inside thread | | |
| | | TP00.000 | | |
| | | |
| | | |
| | | Tool for special, female contacts (e.g. contact P/N E22 200.14) which are inserted only after termination to a wire. Slip tool through the contact mounting hole from the mating side of the contact block. Screw the tool into the terminated contact and pull firmly until the contact is locked into the contact block. Attention: Once contact P/N E22 200.14 has been inserted into the contact block, it cannot be removed. | | |
| | | |
| | | | | | | | | | Length: | 75 mm | | | | Outside thread: | M1.7 | | | | Material: | Stainless Steel | | | | | | | | | |
| | | |
| | | 3 | | |
| | | |
| | | All dimensions shown are in millimeters and are for reference only. | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |