| | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | f^s cher | | |
| | | MIXED HIGH VOLTAGE MECHANICAL SPECIFICATIO | | |
| | | |
| | | |
| | | Please note that the plugs of this group have a different shape than those of the standard version. These connectors are supplied with insulating cable vices. The available inner diameters are listed on page H8. The connection of a cable screen and/or a sealed cable entry is not possible with this clamp type. Some of these types, however, can be delivered with special metal clamps, allowing the clamping of a cable screen. | | |
| | | |
| | | D Panel receptacle | | |
| | | |
| | | | | | | | | | | | | | | TYPE | A | Bmax | C | D | M | V | | | | 105 A036 | 55 | 15 | 2 | 22 | 18x1 | 22 | | | | 105 A060 | 55 | 15 | CM | 22 | 18x1 | 22 | | | | 106 A014 | 48.5 | 18 | 3 | 37 | 32x1 | TX00.106 | | | | | | | | | | | | | | |
| | | |
| | | The D 106 A014 is supplied with a slotted nut. For insertion of male high voltage contacts which have to be assembled after wiring, we recommend tool No TP00.001, shown on page K3. | | |
| | | |
| | | 105 Series The high voltage center contact is retained in a special insulator. To achieve proper high voltage performance, the window for soldering of the wire has to be covered by the supplied insulating tube, which must be placed over the cable before soldering. | | |
| | | |
| | | 5 | | |
| | | |
| | | All dimensions shown are in millimeters and are for reference only. | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | |