Mini Float Level Switch
28Pages

{{requestButtons}}

Catalog excerpts

Mini Float Level Switch - 1

Mini Float Level Switch

Open the catalog to page 1
Mini Float Level Switch - 2

PRODUCT INTRODUCTION The reed switch relies on two basic scientific principles namely: buoyancy and magnetism. Buoyancy causes the float (which contains a magnet) to rise with the liquid and magnetism helps open and close the switch. Since this product's this product has been introduced to the market, it has seen significant improvement and advances with regards to convenience, safety and lowering costs. Fig. 1 illustrates the pivot activation (FCH Type reed switch). When float's magnet is moved close to the switch's stationary stem, the float magnet pushes the stem's switch circuit...

Open the catalog to page 2
Mini Float Level Switch - 3

CHEMICAL RESISTANCE Excellent O Good A Fair X Corroded Sulfuric Acid Chromic Acid Plastic RubberStainless

Open the catalog to page 3
Mini Float Level Switch - 4

• Excellent O Good A Fair X Corroded

Open the catalog to page 4
Mini Float Level Switch - 5

REED SWITCH PROTECTION When using reed switches for inductive loads such as motors, relay coil, solenoids, etc., the contact points will sometimes be subjected to high voltages. Such high induced voltages may damage the reed switch or significantly reduce its life. H Therefore, circuit protectors such as: RC snubbers, varistors or clamping diodes are recommended. (see Fig. 4a, Fig. 4b, Fig. 4c) 4 Do not directly connect the solenoid valve,motor 4 CAPACITIVE LOADS When using reed switches for capacitive loads such as capacitors, incandescent lamps or long cables, the contact points will be...

Open the catalog to page 5
Mini Float Level Switch - 6

FLOAT SPECIFICATIONS TYPE white black Max. Pressure Weight 2 (kg/cm ) (g) white black white PP / black PP /

Open the catalog to page 6
Mini Float Level Switch - 7

STAINLESS STEEL SWITCHES FD MH50A /56A Switching Switching Switching Capacity Voltage Current Max. Max. Max. Lead Wire Operating Temp.

Open the catalog to page 7
Mini Float Level Switch - 8

HOW TO ORDER SINGLE SWITCHES ※ Connector M12 whose standard wire length is 2M ※ Connector M12 whose wire is endurable with oil and made of PVC / PUR, Max.Temp: 80BC 500mm per Unit 300mm (Standard length) Material of Lead wire F: SILICON (150LC) AWG24 X f4 T: TEFLON (200LC) AWG24 X: XLPE (125LC) AWG22 (Standard) ※ Material of Wetted parts"SUS304"。

Open the catalog to page 8
Mini Float Level Switch - 10

MARINE LEVEL SWITCHES ■ FDB-0450 PARTS OF SLOSH SHIELD

Open the catalog to page 10
Mini Float Level Switch - 11

HOW TO ORDER MARINE LEVEL SWITCHES D:DIN Connection ※ Connector M12 whose standard wire length is 2M ※ Connector M12 whose wire is endurable with oil and made of PVC / PUR, Max.Temp: 80BC Contact Form A: Normal open(N.O.) ※ 500mm per Unit ※ 300mm (Standard length) ※ 2M is standard length of lead wire for ASI connection

Open the catalog to page 11
Mini Float Level Switch - 12

STAINLESS STEEL MODELS Washer: NBR Drill hole f17mm Washer: NBR Drill hole f10mm Washer: NBR Drill hole f17mm Washer: NBR Drill hole f10mm Washer: NBR Drill hole f17mm Washer: NBR Drill hole f17mm

Open the catalog to page 12
Mini Float Level Switch - 13

METAL TYPES Lead Wire

Open the catalog to page 13
Mini Float Level Switch - 14

ORDERING METAL SWITCHES Material of Wetted parts 0 : SUS304 6 : SUS316 Mounting 1 : Top or Bottom Mounting 2 : Side Mounting Switching Capacity Max. D: 50W 240Vac /200Vdc SPST F : 10W 125Vac SPST G: 60W 220Vac SPDT (only use for tude f12.7) S: Others Contact Mode A: Normally Open (N.O.) SPST B: Normally Closed (N.C.) SPST C: 1C SPDT D: N.C. Reversible E: N.O. Reversible High Temperature only available for A or B Type Lead wire Length (Unit=100mm) 500mm per Unit 300mm (Standard length) Material of Lead wire B: PVC cable (80LC) C: PVC cable (80LC) D: XLPVC (105LC) F : SILICON cable (150LC) P...

Open the catalog to page 14
Mini Float Level Switch - 15

Installation / N.C.I N.O. Action Position Lead Wire Normally open Normally closed - Reed Switch Reed Switch All the products in this range come with UL All the products in this range are designed to be side mounted. Water's specific gravity is used as the reference

Open the catalog to page 15
Mini Float Level Switch - 16

PLASTIC OH MODELS FC H21PD / H31PD 1 FCH2 and FCH3 models are available in PP, Nylon, and PVDF. 1 Special lead wire/cable are available on request. 1 Different reed switches are available for selection. 1 For standard design specifications see catalog (p14). 1 OEM designs are welcome. 4 Installation / N.C. / N.O. Action Position [ External mounting ] Arrow Downward Normally Closed EPDM Parking N.C. function, i.e. the contact opens when the liquid level rises. Max. 6mm Arrow Upward Normally Open N.O. function - the contact point closes when the liquid level rises.

Open the catalog to page 16
Mini Float Level Switch - 17

PLASTIC OH MODELS 4 Installation / N.C. / N.O. Action Position N.O. function, i.e. the contact closes when the liquid level rises. N.C. function, i.e. the contact opens when the liquid level rises. Hollow Float Switching Switching Switching Carry Material Capacity Voltage Current Current Max. Max. Max. Max. PP Lead Wire XLPE PVC Operating Suitable Max. Sp. Gr. Pressure Temp. 4 kg/cm2 -20~80LC

Open the catalog to page 17
Mini Float Level Switch - 18

Foam Float material: PP Foam Float material: PP Washer: NBR Drill hole f10mm Washer: NBR Drill hole f10mm Hollow Float Hollow Float O-ring: VITON Drill hole f10mm O-ring: VITON Drill hole f10mm Switching Capacity Max. Switching Voltage Max. Carry Current Max. (A) Lead Wire Reversible Switch Action Operating Temperature Material Suitable Specific Gravity

Open the catalog to page 18
Mini Float Level Switch - 19

Hollow Float Foam Float Hollow Float O-Ring: VITON

Open the catalog to page 19
Mini Float Level Switch - 20

PLASTIC OV MODELS 4 SPECIFICATIONS Type Description Switching Capacity Max. Switching Voltage Max. Lead Wire Reversible Switch Action 2 Operating Temperature Suitable Specific Gravity

Open the catalog to page 20
Mini Float Level Switch - 21

HOW TO ORDER PLASTIC OH/OV MODELS Order No./ Model FC H1~H6 Side Mounting FC V1~V9 Top or bottom Mounting Material of Wetted parts 1 : PP 3 : PVDF 4 : Nylon Material of Float F :PVDF P : PP (hollow) K : PPS N: NBR Q: PP (foam) G :Polysuphone Y : Nylon (Unsuitable for immersion in water for long persisting periods) Switching Capacity Max. D : 50W 240Vac /200Vdc SPST F : 10W 125Vac SPST K : 20W 150Vac/200Vdc SPDT Contact mode A: Normally Open (N.O.) SPST B: Normally Closed (N.C.) SPST D: NC Reversible E : NO Reversible ※ FCV11/219DD & FCV11/219DE are unavailable for reversible option. ※ Side...

Open the catalog to page 21
Mini Float Level Switch - 22

CUSTOMIZED PLASTIC MODELS FC PV1 Foam Float material: PP Foam Float material: PP Foam Float material: PP O-Ring: VITON O-Ring: VITON O-Ring: VITON 1 NOTE: Float material’s are optional. The above items are custom-built when client demands are unique. The benefits are listed below: 1 FCPV1 One float for one level activation. 1 FCPV3 Two floats actuate two independent reed switches: Each float unit’s default setting can be either N.O. or N.C. as per cus FCPV2 One float with 2 reed switches. 1 Applicable for conditions where 1 float can actuate switches at high and low levels.

Open the catalog to page 22

All FineTek Co. catalogs and technical brochures

  1. Thermocouple

    12 Pages