Text version of the page

SOLAR MAX dry coolers and condensers

The Solar Max dry coolers and condensers are designed for commercial and industrial cooling and refrigeration plants. Due to its construction, the range is especially suitable when high capacity relative to available space, low energy consumption or low noise levels are required. Characteristics Technical data ∆ T1 15 K, EN 327) 15 sizes with nominal capacities from 146 to 1638 kW (water, EN 1048) for liquid use and with nominal capacities from 170 to 1812 kW for condenser use (R404A/ The heat transfer section is made of copper tubes and aluminium fi ns. Standard fi n spacing is 2.3 mm. As an option, aluminium fi ns with epoxy coating are also available. They extend the working life of the coil in urban and coastal environments. The capacity correction factor for epoxy- coated aluminium fi ns is 0.97.The heat transfer section can be multi-circuited or equipped with a sub-cooling circuit.During short loading peaks a water spraying system can considerably increase the heat transfer capacity.The coil of a dry cooler is equipped with draining and venting nipples but the standard version cannot be totally drained. Please take this into consideration when specifying the freezing point of the heat transfer liquid.The fan chambers are separated crosswise. The products are equipped with lifting lugs, and smaller models have lifting points for a forklift (see lifting instructions in the dimensional drawing).When placing the products, please ensure that the air fl ow is neither obstructed nor re-circulated. If there are several coolers, you can reduce the spacing between units by installing them on a higher mounting base. Please check the placing of multiple coolers with our representative.A manual including installation and service instructions is shipped with each unit. Performance data according to Eurovent Rating Standards 7/C/002 and 7/C/003 Two fan sizes and fi ve fan speed alternatives to reach the required sound level Casing made of hot dip galvanised steel Complete fan control systems available, based on fan speed regulation (SVC) or on stepwise starting cycle of fans (Step Control) Product selection with the Polar Power selec-tion program
02/2006 1