You may also be interested in
The Solar Junior
condensers are designed as heat exchangers for commercial refrigeration and air conditioning. Due to its construction, the range is especially suitable for places where easy assembly as well as a light and robust structure are required. The units are designed for outdoor use, but the structure and low sound level make them suitable also for indoor use, where the condensation effect can be utilized for heating. Solar Junior G
dry coolers, designed for cooling water or solutions that do not corrode copper, are presented in a separate brochure. Characteristics Technical data 39 sizes with nominal capacities from 7.5 to 265 kW (R404A/DT1 15 K, EN 327) The heat transfer section is made of copper tubes and aluminium fi ns. Fin spacing is 2.3 mm. It can be multi-circuited according to the number of circuits or equipped with a sub-cooling circuit. Casing material is polyester coated hot dip galvanized steel, colour grey NCS 2502-B.The fan chambers are separated crosswise. The products are equipped with lifting lugs. All standard products are suitable for both horizontal and vertical mounting. Electrical connection including safety switch is located at the end of the
condenser.A manual including installation and service instructions is shipped with each unit. Performance data according to Eurovent Rating Standard 7/C/002 Three fan sizes and four fan speed alternatives Two mounting positions: H = vertical air fl ow and V = horizontal air fl ow Complete fan control systems available, based on stepless variable fan speed control (VC) or stepwise starting cycle of fans (Step Control) Quick installation, fans are connected to the
cooler end Product selection with the Polar Power selection program
02/2006 1
