Text version of the page

SOLAR Air cooled dry coolers (G) and Condensers (L)

Air-cooled SOLAR dry coolers and condensers are designed for commercial, industrial, and air conditioning applications. With a wide range of sound level alternatives these units are particulary suited to demanding, noise sensitive environments.

Features

Plain profile fins make the coil less prone to fouling and easier to clean. 38 sizes, with performance data according to Eurovent Rating Standard 7/C/002 and 7/C/003 :
o Nominal capacities for dry coolers 37…1651 kW (water All units built in a facility approved according to ISO9001:2000 quality system
EN 1048 ) o Nominal capacities for condensers 40…1833 kW (R404A/ Easy product selection with the Polar Power selection program: http://www.fincoil.fi/
t 1 15 K, EN 327 ) . Pressure vessel construction to PED 97/23/EC. Two fan sizes and five fan speeds to closely match required sound level

Technical data

Standard high efficiency IEC motors. The heat transfer section is made of copper tubes and aluminium fins. Standard fin spacing is 2.3 mm. Other fin materials and spacings are available as option. Two mounting positions: H=horizontal coil, vertical air flow and V=vertical coil, horizontal air flow New improved floating coil construction to reduce the risk of tube failure due to thermal expansion. ( Pat. Pending Casing material is hot dip galvanised steel. ). The heat transfer section can be multi-circuited or equipped with a sub cooling circuit. Dry coolers are provided with venting and draining valves. Two complete fan control options available; stepless fan speed controll with frequence converter (SVC) or stepped fan staging control (SC). Fan sections are individually partitioned so each fan can be controlled separately. Note: standard coil cannot be drained completely. Take care to ensure that the heat transfer fluid freezing point is appropriate to the local conditions. Also, make sure that the fluid is suitable for the coil construction materials. Always follow the recommendations and instructions of the heat transfer fluid/refrigerant manufacturer. An optional water spray system can provide a considerable increase in capacity to cope with exceptional, short-term peak loads. Adjustable unit height A detailed technical manual including lifting, installation, service and maintenance instructions is shipped with each unit. Subject to change without prior notice
. -1- 12/2006