Text version of the page

Cast Iron-, All-Steel- and AluminiumDie Sets and Plates Remarks and Guide Lines Execution Special Die Sets and Plates toCustomers’ Drawings

Contour faces of FIBRO Steel Die Sets arefully machined. Contour faces ofAluminium Die Sets are sawn, as are those of Aluminium Plates. However, these contour faces can also be machined on request. To all die setplates, a general thickness tolerance of ±2 mm applies. Die sets and plates up to size 2200 1100 mm (external dims.) will be made to customer’s drawings, with any special features and highest precision.

Special Machining Features

before

Guide Elements

Wherever possible, all larger apertures or holes should be done by FIBRO final machining of die sets, for their application at the customer’s works mustresult in die set distortion and impairment of accuracy. Guide pillars DIN 9825/ISO 9182(209.19.)and headed guide bushes DIN 9831/ISO 9448 (2081.) are normal equipment onall-steel die sets.Detailed information under Guide Elements.

Lifting Aids on Die Sets Enquiry Forms for SpecialDie Sets – also refer to pages

Plate sizes with edges a
1 +b
1 1000 mm,and die sets weighing more than 100 kg, arefitted with threaded holes for two lifter eyebolts per plate. Eyebolts etc. aresupplied against special order.
A

30 –

A

33

Special pre-printed forms for enquiries and ordering are available on request. All the customer has to do is the filling-in ofdimensions and the specifying of guideelements or special machining featureswhere applicable.
° 2·2471·9·2 subject to alterationsA 3