BOLT LOCK SYSTEM
16Pages

BOLT LOCK with retaining plate BOLT LOCK

Introduction Punch with retaining plate BOLT LOCK The development of the BOLT LOCK system is a logical continuation of today's quick-release systems for punches beyond a shaft diameter of 40 mm. Since the punches are available for any geometries, the compact system can be used for a variety of applications. An example of this is the use of punches to cut sheet metal parts, which are not manufactured as individual parts, but rather mainly as multiple parts for economic reasons. Large perforations in structured parts of the car body can be manufactured without a problem using the system. In...

Ordering example Punch BOLT LOCK Note: See table for standard dimensions Special dimensions to order Punch: 22 without ejector pin Shape: slot Length P = 100 mm Punch cutting Shape: slot rectangle with radiused =""5 Order Code Length: l character optional Order Code character With retaining plate = Z BOLT LOCK *only for (a x b): 01, 04, 05 **only available as CAD download Note: Special forms available upon customer's request. Use blank 2207. for CAD data, see fibro.partcommunity.com. BOLT LOCK = 7 other materials and coatings available upon request Ordering example: 2 2...

Special designs Punch BOLT LOCK BOLT LOCK punches can be designed with individual cutting contours. For this purpose, blanks are available as starting models at the fibro.partcommunity.com download portal. In this starting model, the corresponding cutting contour can be imported using the CAD system after download and preferably sent to FIBRO in STEP format. Six sizes are available at the download portal. During selection, the maximum dimensions X, Y of the cutting form apply as a limit. customer-specific cutting contour - max. dimensions of 110 x 69 mm Selection of punch BOLT LOCK, blank...

Punch BOLT LOCK, Blank _Q Punch BOLT LOCK, Blank Size / (Order No) a, b, l / (Order Code character) Material: HWS (1.2379) Hardness 60 +2 HRC Other materials available upon request. Description of materials see main catalogue at the beginning of chapter E. Note: BOLT LOCK punches, blank, cannot be ordered. They are used only for customer-specific cutting contours/special designs.

ouaidii 2217. Punch BOLT LOCK, Round Size / (Order No) a1 b1 Pmin Pmax l1 / (Order No) l / (Order Code character) Format: Round P = 0 50 mm Punch cutting length: h 20 mm Length: l 77 mm Size: 0 1 (a, x b-i: 80 x 55 mm) Material: HWS (1.2379) Typ: 0 OLT LOCK Version: Round Punch: without ejector pin = 05000 O rder No = (2) Order code character = (E) Order No = (1) Order No p (2) Order No = (7) Order No = (1) Material: HWS (1.2379) Hardness 60 +2 HRC Other materials available upon request. Description of materials see main catalogue at the beginning of chapter...

Punch BOLT LOCK, Square 2227. 1 1 Mounting example 2227. Punch BOLT LOCK, Square Size / (Order No) a1 b1 Pmin Pmax l1 / (Order No) l / (Order Code character) Ordering-code (example): Other materials available upon request. Description of materials see main catalogue at the beginning of chapter E. Execution: Punch BOLT LOCK, Square are provided with an extraction thread (M10). Note: Order No. for Punch BOLT LOCK, Square with retainer BOLT LOCK including screws and pins: 2227.2DE2.DDDDDZ Format: Square P = 40,5 mm Punch cutting length: l, 20 mm Length: l 77 mm Size: 01 (a1 x...

Mounting example 2237. ouaidii 2237. Punch BOLT LOCK, Rectangular Size / (Order No) a, b Pmin Pmax Wmin Wmax h / (Order No) l / (Order Code character) Format: Rectangular, width W W = 45,5 mm Format: Rectangular, length P P = 70,5 mm F unch cutting length: l1 20 mm Length: l 77 mm Size: 01 (a! x b-i: 80 x 55 mm) Material: HWS (1.2379) Typ: BOLT LOCK Version: Rectangular P unch: without ejector pin = 04550 = 07050 Order No = (2) Order code character = (E) Order No = (1) Order No = (2) Order No = (7) Order No = (3) = 22 Material: HWS (1.2379) Hardness 60 +2 HRC Other...

Punch BOLT LOCK, Slot 2247. Mounting example ■— wrfr 2247. Punch BOLT LOCK, Slot Size / (Order No) a1 b1 Pmin Pmax Wmin Wmax l1 / (Order No) l / (Order Code character) Material: HWS (1.2379) Hardness 60 +2 HRC Other materials available upon request. Description of materials see main catalogue at the beginning of chapter E. Execution: Punch BOLT LOCK, Slot are provided with an extraction thread (M10). For cutting form width W < 20 mm, the punch is provided with a transverse bore (0 10 mm). Note: Order No. for Punch BOLT LOCK, Slot with retainer BOLT LOCK including...

Mounting example 2257. ouaidia 2257. Punch BOLT LOCK, Rectangular with radiused corners Size / (Order No) a, b, Pmin Pmax Wmin Wmax h / (Order No) l / (Order Code character) 01 / (1) 80 55 55 79.9 10 54.9 20 / (E) 77 / (E) ~ = 07050 Order No = (2) Order code character = (E) Order No = (1) Order No = (2) Order No = (7) Order No Format: Rectangle with radiused corners, width W W = 45,5 mm = 04550 Format: Rectangle with radiused corners, length P P = 70,5 mm Punch cutting length: l1 20 mm Length: l 77 mm Size: 01 (a, x b,: 80 x 55...

Retainer BOLT LOCK 2664.11.01 ø10,5 Delivery including socket cap screws DIN EN ISO ​ 762 and pins 4 DIN EN ISO 8735 Delivery including socket cap screws DIN EN ISO ​ 762 and pins 4 DIN EN ISO 8735

Retainer BOLT LOCK 2664.11.03 Delivery including socket cap screws DIN EN ISO ​ 762 and pins 4 DIN EN ISO 8735 64 120 ±0,01 Delivery including socket cap screws DIN EN ISO ​ 762 and pins 4 DIN EN ISO 8735

Retainer BOLT LOCK 2664.11.05 Material: Note: Delivery including socket cap screws DIN EN ISO ​ 762 and pins 4 DIN EN ISO 8735 Delivery including socket cap screws DIN EN ISO ​ 762 and pins 4 DIN EN ISO 8735

Plot No: A-55, Phase II, Chakan Midc, Taluka Khed, Pune - 410 501 FIBRO (SHANGHAI) PRECISION PRODUCTS CO., LTD. 1st Floor, Building 3, No. 253, Ai Du Road Pilot Free Trade Zone, Shanghai 200131 07/2017 © Copyright by FIBRO GmbH Printed in Germany on paper bleached without chlorine Order No. 2.2402.00.0317.0100000