MOTORS AND GEARED MOTORS - 2 - FIBER - #1

Gearbox

W11

o

cd

o

o

150 Ncm

o

cd

150 Ncm (max.)

from 25/3 to 720.000 (table page 8.47)

from 1s to 32 h (table page 8.47, 8.49-7-8.51)

0 8 x 16,3 mm milled 6 x 8 mm, steel Clutch

bidirectional: 100 Ncm

see chart

operating: -10°C +55°C storage: -30°C +80°C

in any position, with 2 M4 screws

140 g

ROHS (Directive 2002/95/CE)

Motor max. torque taking into account the gearbox average efficiency n = 0,6 (not considering the operating life, see below)

800

o

o

CT o

20

10

8

Load on the output shaft for 1,000 hours

Load on the output shaft for 10,000 hours

With 500 rpm motors

Ratio

The W11 gearboxes have a sturdy die-cast aluminum alloy housing. The reduction ratio gears, made in self-lubri­cating acetal resin to ensure noiseless opera­tion, turn on hardened steel pins. The steel output shaft turns on self-lubricating sintered bearings. The motor is fastened to the gearbox with a removable bracket. This sim­ple coupling allows quick gearbox replacement. The W11 gearbox is supplied with a standard output shaft 0 8 X 16.3 mm with milled plane 6 X 8 mm. Special output shaft are also avai­lable on request.

For this gearbox, bidirectional clutch can be mounted on the output shaft.

Type of output shaft

Ratio

Output shaft

Clutch

A without clutch xx see page 8.47 00 standard

H bidirectional 100 Ncm xx special

Other versions on request.

The following motors can be to the W11 gear­box:

M61,M51,M42,M52,M53,M54,M72,M74,M80, M83 and M84; using the special fixing brackets. (see page 12.7)

H 0 8 x 16,3 mm milled 6 x 8 mm

0 special shaft