Air angle nutrunners - 20 Pages

Add to MyDirectIndustry favorites
Air angle nutrunners

Catalog excerpts

Reliability and accuracy: real innovation knows no obstacles. Air angle nutrunners • with 90° angle head • with 30° angle head • with flat head drive • Torque range: from 0,8 to 60 Nm • Automatic

 Open the catalog to page 1

Tightening in presence of limited space and where access is difficult. Also with high torques. Particularly suitable for motorvehicle industry and household appliances, angle nutrunners are indispensable when space is limited and where access is difficult, such as up against walls, close to metal sections and profiled beams, etc. Main features are: • robust angle heads to guarantee long lifetime • high torque accuracy • great attention to ergonomics 2 Real innovation knows no obstacles

 Open the catalog to page 2

With the AF nutrunners all points that need tightening are within easy reach These air nutrunners with a flat head drive are the most effective tool for solving all assembly situations where it’s difficult to reach the point to tighten and where objects would get in the way of ordinary angle nutrunners. More specifically, the AF air angle nutrunners are extremely useful where there are pressurised circuits, that is to say components with pipes containing fluids fitted with nuts that need tightening (as could be gas ramps in hobs, refrigerator compressor pipes, car braking system pipes,...

 Open the catalog to page 4

Robust angle heads to guarantee reliability and long lifetime. Radial opening ideal to reach the nut.

 Open the catalog to page 5

Long lifetime of the components thanks to careful design and to quality of the productive process which results in less maintenance and repair costs The torque control system with instant automatic air shutoff improves the quality of the tightening process, and consequently that of the finished product High performance motor: optimising performance even when supply pressures are low Robust control top, obtained by mechanic working, guarantees high resistance to hits and long lifetime High tightening precision: CM/CMK values are extremely high; therefore they can be used where great...

 Open the catalog to page 6

Perfection is in your hands Naturally innovative Optimization of the tool performances in regard to ergonomics and operator safety Innovative systems designed paying even more attention with respect to environment and of its safeguard All nutrunners, except for A...R models, have a rotating cursor for the adjustment of the clutch, practical, easy and safe Effective built-in silencing system: these nutrunners are extremely noiseless and are equipped with a controlled spread of the exhaust air The long ergonomic start lever permits a more comfortable and easy grip to guarantee the operator’s...

 Open the catalog to page 7

• The figures shown are measured at a pressure of 6,3 bar (ISO 2787) the recommended operating pressure. • Tightening torque values have been measured in accordance with ISO 5393 standard. • Noise level has been measured in accordance with ISO 3744 and ISO 15744 standards. * Additional factor: 3 dBA spread in method and production (ISO 15744). • Vibrations level have been measured in accordance with ISO 28927 - 2 standars. • Accessory drive: male square drive (ISO 1174). • The code number must be used when ordering. Legend Reversibility: all models are suitable for tightening and...

 Open the catalog to page 8

How to choose 40A...AF... models 40 = Nutrunner power (400 watt) • A = Angle nutrunner • 17 = Maximum torque expressed • A = Air shut-off • F = Flat (flat head drive) • 12 = Hexagonal drive used • B/T = Type of end gear (Blind or Through - E.g.: B = Models with Trough end gear (T version instead of B) (i.e. 40A17AF12B ^ 40A17AF12T) • 7,5 = Extended hexagon size, the size can be from 7.5 mm to "n", depending on the need. To guarantee maximum nutrunner performances over time the head has to be greased, equivalent to three injections with the grease gun supplied, every 3.000 cycles Legend...

 Open the catalog to page 9

standard CONFIGURATIONS END GEAR FOR HEX FROM 8 TO 15 mm • Blind hexagon • Through hexagon for end gears until 14 mm • Reinforced hexagon for end gears from 15 mm EXTENDED END GEAR FOR HEX FROM 16 TO 22 mm • Blind hexagon EXTENDED HEXAGON SIZE * Size (mm) from 7 mm .5 to “n” , depending on the need • Through hexagon 9 mm: maximum pipe diameter the head can hold. Different diameters upon request. The size of the extended hexagon (*), can be: - 0 to 30 mm for use of hexagons up to 15 mm max - 7 to 30 mm for use of hexagons greater than 15 mm .5 CONFIGURATIONS AVAILABLE UPON REQUEST END GEAR...

 Open the catalog to page 10

CARTESIAN ARMS BC AND BCA The new Fiam Cartesian arms represent fundamental solutions for ergonomics workplace. They are completely designed and manufactured by Fiam and can be used with any type of tool with a diameter up to 50 mm and weight up to 11 kg. A universal clamp is supplied but, upon request, numerous accessories are available for correctly fitting different Fiam tools to ensure maximum safety and functionality. Available in 2 versions: • Cartesian Arms • Articulated Cartesian Arms All models are also available with positionning device for processing angular and linear movement...

 Open the catalog to page 12

AD.../AG... MODELS

 Open the catalog to page 13

Air angle nutrunners + screws counting 0% error, 100% accuracy. Did you lose any screws? The ‘screws count’ function will help you: therefore in case of high production rate, you won’t risk any omission. Moreover, the feed-back signal and the end one to pass to next piece accelerate the production cycles and ensure control on the assembled products. So dead times will decrease and quality will increase. The solution includes: • Lever AIR ANGLE NUTRUNNERS equipped with pneumatic pick-up signal (ported) • COMPUTERIZED MONITORING UNIT TOM (Tightening Operation Monitor): it allows the...

 Open the catalog to page 15

• 8 for programmes selection, 6 for remote functioning: switching off, program activation, tool stop, tool loosening, program reset Availables with contacts 24V/GND (both pull-up and pull-down) for a great compatibility with the bench buttons (i.e: reset, block, unblocking etc.) and to be interface with the PLC of the client • For results, active program, screwdriver status and possible electro-valve activation, auxiliary output, signal waste piece, in cycle signal (to check the beginning and the end of tightening cycle, useful i.e. set/unset the pieces jigs) Automatic check of tightening...

 Open the catalog to page 17

All FIAM Utensili Pneumatici Spa catalogs and technical brochures

  1. Air tappers

    16 Pages

  2. Air drills

    24 Pages

  3. Air marking pen

    2 Pages

  4. Vane air motors

    24 Pages

  5. IP900

    4 Pages

Archived catalogs

  1. Reaction arms

    20 Pages

  2. Air tappers

    16 Pages

  3. Air Drills

    24 Pages