| | | Specified limit values for technical data and any specific instructions must be adhered to by the user in order to ensure recommended operating conditions. When pneumatic components are used, the user shall ensure that they are operated using correctly prepared compressed air without aggressive media. When Festo components are used in safety-oriented applications, the user shall ensure that all applicable | | national and local safety laws and regulations, for example the machine directive, together with the relevant references to standards are observed. Unauthorised conversions or modifi- cationstoproductsandsystemsfrom Festo involve a safety risk and are thus not permissible. Festo does not accept any liability for resulting damages. You should contact Festo's advisors if one of the following apply to your application: | | ■ The ambient conditions and conditions of use or the operating medium differ from the specified technical data. ■ The product is to perform a safety function. ■ A risk or safety analysisisrequired. ■ You are unsure about the product's suitability for use in the planned application. ■ You are unsure about the product's suitability for use in safety-oriented applications. | | All technical data applies at the time of going to print. All texts, representations, illustrations anddrawings includedin this catalogue are the intellectual property of FestoAG& Co.KG, andare protected by copyright law. All rights reserved, including translation rights. No part of this publication may be reproduced or transmitted in anyformor byany means, electronic, mechanical, photocopying or otherwise, without the prior written permission of Festo AG & Co. KG. All technical data subject to change according to technical update. | | |