Position sensors SMH-S1, for grippers - FESTO - #1

Text version of the page

Position sensors SMH-S1, for grippers Productoverview • Position sensors, adapted to Festo grippers • Freely selectable switching points • 3 gripper positions can be detected using an evaluation unit Detailed product information www.festo.com/catalog/smh Design Type ofmounting Measuring Operating voltage Analogue output Switch output Switching Page/ principle range elementfunction Internet Position sensor SMH-S1 For gripper Screwed to gripper Magnetic Hall 24VDC 2 Evaluation unitSMH-AE1 For position sensor SMH-S1 With mountinghole 24VDC 3xPNP N/O contact 3 3xNPN Signal converter SVE4 For position sensor SMH-S1 With mountinghole 10...30VDC 2x PNP Switchable sve4 2x NPN Key features The position sensor SMH-S1 has been specially developed for use with Festo grippers. An analogue electrical signal is generated in the proximity sensor dependingon the gripper position. The conversion to 3 digital output signals (correspondingto 3 gripper jaw positions) takes place via the signal converters SVE4 or the evaluation unitsSMH-AE. Note Sensors that detect magnetic fields, such as position sensors SMH, must not be secured onto the drive using mountings made from ferritic materials, as this can lead to malfunction. In order to ensure the correct functioningof the position sensor the outlet cables and the compressed air tubingmust be mounted in the same direction. 2011/06 - Subject to change Internet: www.festo.com/catalog/... 1