Length or Distance m > ft=x 3.281mm > inch= ÷ 25.4 Volume cm³ > in³=x 0.061 Mass g > lb=x 0.002kg > lb=x 2.2046 Pressure bar > psi=x 14.7 Temperature C° > F°=x [1.8] + 32 Flow l/min > Cv=x 0.001l/min > scfm=x 0.0353 Conversion Factors The conversion table belowincludes the units most commonly used for designing a system. They are given to enable the user to make necessary calculations. Force N > lbf=x 0.2248kgf > N = x 9.80665=x 8.8507=x 0.7376 Torque Nm > in-lbNm > ft-lb Moment of Inertia kg·cm² > lb-in²=x 0.3417kg·m > lb-ft=x 7.233kg·m² > oz-in²=x 5.4675 While every effort is made to ensure that all dimensions and specifications are correct, any printing errors not rectified are outside the control of Festo, who cannot be held responsible for the same. For Liability and Warranty conditions, refer to our standard “Conditions of Sale”, available on request from your local Festo office. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying or otherwise, without the prior written permission of Festo. All technical data subject to change according to technical update. © Copyright 2005, Festo Corporation