| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Linear drives DGPL, with guide Technical data | | |
| | | |
| | | Characteristic load values for drive with plain-bearing guide GF | | |
| | | |
| | | The indicated forces and torques referto the centre of the guide rail. They must not be exceeded in the dynamic range. Special attention must be paid to the cushioning phase. | | |
| | | |
| | | If the drive is subjected to more than two of the indicated forces and torques simultaneously, the following equations must be satisfied in addition to the indicated maximum loads: | | |
| | | Fy Fz | | My | | |
| | | Mx | | | Mz | | |
| | | < 1 | | |
| | | |
| | | |
| | | Fymax. Fzmax. Mxmax. Mymax. Mz max. | | |
| | | |
| | | Note | | |
| | | |
| | | |
| | | All values for the GF version refer to a speed of 0.2 m/s. | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | Permissible forces and torques | | | | Piston 0 | 18 | 25 | 32 | 40 | 50 | 63 | 80 | | | | | | | | Fymax. [N] | 340 | 430 | 430 | 1010 | 1010 | 2000 | 2000 | | | | Fzmax. [N] | 340 | 430 | 430 | 1010 | 1010 | 2000 | 2000 | | | | | | | | Mxmax. [Nm] | 2.2 | 5.4 | 8.5 | 23 | 32 | 74 | 100 | | | | Mymax. [Nm] | 10 | 14 | 18 | 34 | 52 | 140 | 230 | | | | Mzmax. [Nm] | 10 | 14 | 18 | 34 | 52 | 140 | 230 | | | | | | | | Extended slide GV | | | | Fymax. [N] | 330 | 400 | 395 | 930 | 870 | 1780 | - | | | | Fzmax. [N] | 330 | 400 | 395 | 930 | 870 | 1780 | - | | | | | | | | Mxmax. [Nm] | 2 | 5 | 8 | 21 | 28 | 66 | - | | | | Mymax. [Nm] | 18 | 25 | 30 | 58 | 83 | 235 | - | | | | Mzmax. [Nm] | 18 | 25 | 30 | 58 | 83 | 235 | - | | | | | | | | | | | | | | | |
| | | |
| | | ProDrive selection and ordering aid www.festo.com/en/engineering | | |
| | | |
| | | Info 114 - Subject to change - 2003/10 | | |
| | | 32 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |