| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Key features | | |
| | | |
| | | Versatile | | |
| | | 2 Proximity sensor G/H/I/J | | |
| | | |
| | | Optionally on 2 sides (on the end face or from the front) For DGC-G/DGC-GF/DGC-KF | | |
| | | • Proximity sensors can be integrated, which means there is no projection. Cable can be guided through the slot behind a second sensor • For DGC-G/DGC-GF/DGC-KF | | |
| | | |
| | | |
| | | 3 Precision end-position adjustment | | 4 Profile mounting M | | |
| | | |
| | | |
| | | • Between 0 ... 25 mm per side • ForDGC-GF/DGC-KF/DGC-FA | | • Profile mounting attachment remains on the base plate after the drive is dismantled. This means faster assembly and removal without repeat adjustment • ForDGC-G/DGC-GF/DGC-KF/DGC-FA | | |
| | | |
| | | |
| | | 5 Mechanical end-position limiter YWZ | | 6 Intermediate position Z1/Z2/Z3 | | |
| | | |
| | | • For variable end-position adjustment, e.g. forformatadjustments • The end stop can be mounted at any position within the stroke • ForDGC-GF/DGC-KF/DGC-FA | | • Permits variable intermediate positions • The intermediate position module can be mounted at any position within the stroke • Precision repetition accuracy (0.02 mm) with highly dynamic response • For DGC-KF | | |
| | | |
| | | |
| | | Driver FK | | |
| | | |
| | | • Compensates inaccuracies during mountingof the linear drive and external guide • Max. offset 2.5 mm • For DGC-G | | |
| | | |
| | | Example | | |
| | | |
| | | 5 | | |
| | | |
| | | 6 | | |
| | | |
| | | 04/2007 - Subject to change - Pneumatic Linear Actuators | | |
| | | 3 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |