FERROFLO® Lubricated Styrenic Thermoplastics - Ferro Corporation - (Version JPG) - PDF Catalogue | Technical Documentation

See other catalogues for Ferro Corporation

Paint, Additive, Controller, Resin, Epoxy resin

Text version of the page

FERROFLO

Lubricated Thermoplastics


Property	Unit	ASTM Method	SPS05PK02NA	SPS05PK03NA
Tensile Strength @ 73'F	psi	D638	3,200	3,700
Elongation at Break	%	D638	30	5
Flexural Strength @ 73'F	psi	D790	4,700	5,200
Flexural Modulus (tangent)	psi x 10⁵	D790	2.7	3.4
Flexural Modulus (1% secant)	psi x 10⁵	D790	2.5	3.2
Izod Impact @ 73'F Notched	ft-lb/in	D256(1)	2.0	1.0
(1/2" x 1/8" bar)		D256(1)
Izod Impact @ 73'F Unnotched	ft-lb/in	D256	5.0	2.0
(1/2" x 1/8" bar)	ft-lb/in	D256
Gardener Impact @ 73'F	in-lb		16.0	2.0
(Mean Failure Energy)	in-lb
Heat Deflection Temperature, 264 psi	°F	D648	155	165
Heat Deflection Temperature, 66 psi	'F	D648	175	185
Specific Gravity		D792	1.03	1.03
Hardness, Shore "D"		D2240	72	73
Melt Flow	g/10 min	D 1238(2)	35	30
Lubricant Content	%	-(3)	5	5
Mold Shrinkage	in/in		.007	.007

(1) Method A

(2) Condition 23(TC/3.8Kg

(3) PRAXIS PNMR

SPS20PK with higher lubricant loading, for usage as a concentrate, is available.

Mold shrinkage is intended as a guide only, as specific shrinkage is affected by part design, mold design and molding conditions.

Filled and Reinforced Plastics Division

Ferro Corporation 5001 O'Hara Drive Evansville, IN 47711 Tel: (812)435-2100 Fax: (812) 435-2113

Disclaimer And Limitation of Liability

The information contained in this data sheet has been developed through the application of accepted laboratory practice and is believed to be reliable. Since the conditions of application and use of our products are beyond our control, no warranty or representation is expressed or implied regarding accuracy of the information, the results to be obtained from the use of the product, or that such use will not infringe on any patent.

This information is furnished with the express conditions that the user will evaluate it through testing and determine the suitability of the product. Ferro Corporation will not be liable for any injury or damage arising from application of this information. FERRO'S WARRANTY IS SET FORTH IN ITS STANDARD TERMS & CONDITION OF SALE AND IS LIMITED TO PRODUCT REPLACEMENT OR PURCHASE PRICE REFUND. FERRO DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR USE.

FERRO.

FERROFLO® Lubricated Styrenic Thermoplastics - Ferro Corporation - #1

Paint, Additive, Controller, Resin, Epoxy resin