OEM components short catalogue - Fer Strumenti - #1

OEM Components

Condense Monitor

Designed in order to operate a fine filtering of the

sample gas and to verify the absence of condenses before entering the analyzers. With two electrodes pointed out controls the total liquid water absence and filters the sample with a fine filter with 1 micron retention degree.

e up of:

Electronic card: connected to the electrodes on filter it closes a contact in junction box when the minimal part of conductive liquid is present Fine filter: composed from a body in Sinvex P where is placed a fine filter in fiber glass with reten­tion degree of one micron; inside the body the elec­trodes are fixed. The body is closed watertight from a screw cap with transparent window for monitoring the conditions of the filter without interrupting the flow of the sample gas

Uplc

• Low cost card microprocessor based equipped with 24 digital I/O or 6 analog input.

• Moreover there is the possibility to connect a graphi­cal LCD and to communicate with a serial port 485 or 232

• 8 of the 24 I/O can be set as output relays or opto-coupled input.

• The card can be set to the best regarding the specific application where is planned to be integrated in.

Fer strumenti has developed on this card two typical appli­cations for the analysis systems:

1) Serial transmitter with 6 analogical input 4-20 mA: the serial output can be set like normal ASCI 232 or

like client Mod-bus RTU.

2) Timer for the multiplexed sampling (up to 5 points) with pre-washing of the gas to analyze. The card comes with the opportune I/O and with a connector for the connection of a hexadecimal switch for the interval set-up.

FER

strumenti

20038 SEREGNO (MI) - Via Ripamonti, 58 tel. +39 0362 231203 - Fax +39 0362 330349 www.fer-strumenti.com © ferstrumenti@fer-strumenti.com