Switch mode power supplies (selection) - FEAS GmbH - #39

Text version of the page

SNT20012-K SNT20024-K SNT20048-K 582313 582325 582349 12 VDC 24 VDC 48 VDC 10,0 - 15,5 VDC 22,5 - 30,0 VDC 45,0 - 60,0 VDC 70,0 A 40,0 A 20,0 A 840 Watt 960 Watt 960 Watt 90% 91% 91% 171x221x215 171x221x215 171x221x215 approx. 14,70 kg approx. 14,70 kg approx. 14,70 kg P.O. Box 1521 D - 22905 Ahrensburg Phone: +49 +49 4102 42082 Fax: 4102 40930 E-mail : contact@feas.com Internet: www.feas.com as at 17 November 2008 Switch mode DC power supply SNT200-K Output data Control data Operating data Safety devices Safety data Applied design specifications Input data Mechanical data Technical data Input voltage AC 320 - 550 VAC (0-66 Hz) Input voltage DC 450 - 780 VDC Input current each phase at nominal load at 400V in 3-phase operation max.2,35A AC Input current peak Protective circuit Hold-up time 380.000 h Test voltage transformer High voltage resistance 5 kV according to VDE 0551 AC primary- / secondary circuit 3,75 kV acc. to VDE AC Degree of EMI suppression Protection class according to VDE 0871B, EN 55022/B class 1, with PE connection (EN 60950) Extra low safety potential Ambient humidity PELV (EN60204), SELV (EN 60950) 95% relative humidity, yearly average dewing allowed for use in tropical atmosphere IP 65 - >30g at 33Hz in X,Y and Z, acc. to IEC 60068-2-27 Protection class enclosure Protection class terminals Vibration proof according to VDE VDE 0100,0110,0113,0140-1,0551,0160/W2,0806 IEC IEC 60950,IEC61000-6-1-2-3-4,IEC60068-2-3, IEC 60068-2-11-52,IEC 60529,IEC 380 EN EN60950,EN61140,EN61000-6-1,EN61000-6-2, EN61000-6-3,EN61000-6-4,EN55022, EN55011, EN61000-3-2,EN61000-3-3,EN50204, EN60204, EN60529,EN61000-4-2-3-4-5-6-8-11, EN60068-1, EN60068-2-1-2-3-6-27-30, EN45501, EN50021, EN61558-2-17,EN50178 CSA / UL CSA-C 22.2 / UL60950, UL508, UL1950 Mounting Wallmounting with screws M8 Nominal output voltage Range of adjustment Type Nominal output current Power Efficiency Dimensions (W x H x D) Weight Order number - compliant PFC according to IEC/EN 61000-3-2 Output separeted according to VDE0551 Extra low safety potential PELV (EN 60204), SELV (EN 60950) Overload- and open-circuit protected, short circuit proof Parallel connection possible No reverse voltage protection at the output Standard cable length approx. 1.0 metre, other cable lengths on request. Suitable for the tropics - Epoxy resin casted Operating status shown by LED with phase monitor Safety acc. to VDE, EN, UL and CSA Runs under 2-phase operation without performance reduction 171 215 208,0 221,0