Switch mode power supplies (selection) - FEAS GmbH - #29

/ 51


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50


See other catalogues for FEAS GmbH
You may also be interested in

Buffer module, UPS, Optocoupler, Solid state relay, Converter


Text version of the page
Updated: September 25, 2007 Input current peak Output data Output voltage U Current limiting Control data Control deviation load Control deviation supply Control time Operating data Duty circle Operating temperature range Derating Storage temperature range Cooling Safety devices Fuse for input Fuse for output Overload protection Hold-up time MTBF Safety data Test voltage transformer High voltage resistance Degree of EMI suppresion Protection class Ambient humidity Protective class enclosure Protective class terminals Vibration proof Applied construction regulations Nominal Input voltage AC Inputvoltage DC Technical data Input data Residual ripple (20MHz) according to VDE IEC EN CSA / UL Mounting Mechanics Input current at nominal load Protective circuit Extra low safety potential Output current I Nominal - compliant Switch mode DC power supply with integrated 0-10V interface type SNT115-K P.O. Box 1521 22905 Ahrensburg Germany Phone : +494102 - 42082 Telefax: +494102 - 40930 E-Mail : info@feas.de Internet: www.feas.de 85 - 270Volt 120Volt - 400Volt 0 - 66Hz 380.000 h 5 kVac in accordance to VDE 0551 Primary circuit - secondary circuit 3,75 kVac acc. to VDE 0806 / IEC 380 in acc. to VDE 0871 B, EN 55022/B Class 1, with PE connection (EN 60950) 95% relative humidity, yearly average dewing allowed for use in tropical ambient IP 65 - >30g at 33Hz in X,Y and Z, acc. to IEC 60068-2-27 with screws see table below < 50mVpp VDE 0100, 0110, 0113, 0551, 0160/W2, 0806 IEC 60950,IEC61000-6-1-2-3-4,IEC60068-2-3 EN60950,EN50081-1,EN50081-2,EN50082-1 CSA-C 22.2 / UL60950, UL508, UL1950 EN61000-6-1-2-3-4,EN50178,EN55022 EN55011,EN61000-3-2,EN61000-3-3,EN50204 EN60204,EN60529,EN61000-4-2-3-4-5-6-8-11 EN60068-1,EN60068-2-1-2-3-6-27-30 EN45501,EN50021,EN61558-2-17 IEC 60068-2-11-52,IEC 60529,IEC 380 at 115VAC max. 4,0A / at 230VAC max. 2,0A Transient voltage suppressor Varistor PELV (EN60204), SELV (EN 60950) approx. 6,80kg approx. 6,80kg Range of adjustment output voltage Type Power Dimensions (W x H x D) Weight Order-No. Efficiency Nominal output current Nominal output voltage see table below 12,0VDC SNT11512-K 25,0Amp. 300Watt 89% 171x219x103 585114 24,0VDC SNT11524-K 15,0Amp. 360Watt 90% 171x219x103 585126 10,0-15,5VDC 22,5-30,0VDC Output separated according to VDE 0551 Extra low safety potential PELV (EN 60204), SELV (EN 60950) Overload- and open circuit protected short circuit proof Suitable for the tropics - Epoxy resin casted Operating status shown by LED Safety acc. to VDE, EN, UL, CSA Integrated 0-10V interface for controlling the output voltage PFC according to IEC/EN 61000-3-2 Normal cable length approx. 1,0m longer cables possible Parallel connection possible Protected against pol-permutation at the output approx. 6,80kg 48,0VDC SNT11548-K 7,5Amp. 360Watt 90% 171x219x103 585150 45,0-60,0VDC 219,0 171,0 103,0 204,0

pageCatalog pdf di En 2012-05-22-29