Enclosures - 50 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

  14. P. 50

Catalogue excerpts

SWITCHRACKS Custom designed, switchracks, panel boards, motor starters Explosion Proof Electrical Equipment Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 /22 (Dusts) Classification: Group II - Category 2G 2D REFERENCE STANDARDS Directive 94/9/EC (until April 19th, 2016) and Directive 2014/34/EU (from April 20th, 2016) ( II 2 G Ex d IIC T6...T3 II 2(1) GD Ex d [ia/ib IIA or IIB or IIC Ga] IIC T6...T3 II 2 D Ex tb IIIC T85°C...T200°C II 2 D Ex tb [ia Da/ib] IIIC T85°C II 2 G Ex d e ia/ib ia mb IIC T6, T5 or T4 Gb II 2 D Ex tb IIIC T85°C or T100°C Db RULES OF COMPLIANCE EN/IEC 60079-0; EN/IEC 60079-1; EN/IEC 60079-11; EN/IEC 60079-31 PROTECTION DEGREE AMBIENT TEMPERATURE OTHER AVAILABLE CERTIFICATES IECEx INMETRO EAC RINA RUSSIAN MARINE CERTIFICATE (RMRS) UL NEC 505 NEC - NEMA 4, 7, 9 Class I - Groups B, C, e D Class II - Groups E, F, e G Class III INSTALLATION PROTECTION PROTECTION DEGREE AMBIENT TEMPERATURE CERTIFICATION AND COMPLIANCES -20°C ÷ +40°C UL Standard 1203 - 4° Ed. (15 Sett. 2006) Explosion-Proof / Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations Mechanical characteristics Boxes Painting Screws Gaskets Pipes and fittings Supporting rack marine grade copper free aluminum - stainless steel AISI 316L external epoxy powders grey RAL-9006 colour (standard) external stainless steel silicon rubber galvanized steel (standard) - stainless steel (optional) hot dip galvanized steel - stainless steel On request accessories: • Stainless steel pipes and fittings • Galvanized steel epoxy painted supporting rack • Stainless steel supporting rack • Internal anticondensate painting orange RAL-2004 • External colours different from standard

 Open the catalogue to page 1

Switchracks panel boards - general information Explosion Proof Electrical Equipment Description: “SWITCH-RACK” is a word usually adopted to indicate an ensemble of control units, signaling units, motor starters, switching units, and so on. Switch-racks are mechanically assembled on robust frame with various fixing solutions (ground, wall, etc.), electrically wired up on purpose. BARTEC-FEAM since over 50 years, designs and manufacturers switch-racks according to its own diagram or according to customer’s specifications, in full compliance with European CENELEC standards. INFORMATIONS: Test and...

 Open the catalogue to page 2

Explosion Proof Electrical Equipment Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts) Classification: Group II - Category 2G 2D Certificate NEMA Type 4X REFERENCE STANDARDS Directive 94/9/EC (until April 19th, 2016) and Directive 2014/34/EU (from April 20th, 2016) EXECUTION EN/IEC 60079-0; EN/IEC 60079-1; EN/IEC 60079-11; EN/IEC 60079-31 PROTECTION DEGREE AMBIENT TEMPERATURE OTHER AVAILABLE CERTIFICATES Component: INERIS 13 ATEX 9019U IECEx: IECEx INE 13_0070X INMETRO: CEPEL 12.2139 EAC: TC RU C-IT.ГБ08.В.01499 RINA: ELE18111CS_012 RUSSIAN MARINE CERTIFICATE (RMRS): 13.03518.315...

 Open the catalogue to page 3

Explosion Proof Electrical Equipment Reference details EJB Glass windows on cover ENCLOSURE CODE WINDOW CODE 98 I Bartec Feam Catalogue 04

 Open the catalogue to page 4

Explosion Proof Electrical Equipment EJB Glass windows on cover Reference details Reference details CUSTODIA tipo ENCLOSURE type Via M. Pagano, 3 I-20090 Trezzano s/N ITALY www.feam-ex.com NON APRIRE SOTTO TENSIONE DO NOT OPEN WHILE ENERGIZED Ad ogni apertura del coperchio ripristinare il grasso ai siliconi. accertarsi che le valvole di respirazione e drenaggio siano sempre chiuse Renew silicone grease every tyme cover is opened. and make sure that the drain and breather valves are always closed. EJB Indicative quantity of terminals and relevant section CODE EJB Body and cover enclosures drilling...

 Open the catalogue to page 5

EJB Body and cover enclosures drilling layout Reference details Explosion Proof Electrical Equipment EJB Threads comparation table WALL DRILLING AREA A Max allowed quantity of push button and pilot light ENCLOSURE CODE COVER DRILLING AREA Reference details REMARK: Due to the development of the national and international specifications and of the technology, the above technical characteristics showed on this bulletin can be considered as binding on our confi

 Open the catalogue to page 6

Explosion Proof Electrical Equipment Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts) Classification: Group II - Category 2G 2D Certificate NEMA Type 4X REFERENCE STANDARDS Directive 94/9/EC (until April 19th, 2016) and Directive 2014/34/EU (from April 20th, 2016) (II 2 G) Ex db IIB+H2 T6…T3 (II 2 G) Ex db [ia/ib] IIB+H2 T6…T3 (II 2 D) Ex tb IIIC T85°C…T150°C EXECUTION RULES OF COMPLIANCE EN/IEC 60079-0; EN/IEC 60079-1; EN/IEC 60079-11; EN/IEC 60079-31 PROTECTION DEGREE AMBIENT TEMPERATURE OTHER AVAILABLE CERTIFICATES Component: INERIS 13 ATEX 9019U IECEx: IECEx INE 13_0070X...

 Open the catalogue to page 7

Explosion Proof Electrical Equipment Reference details EJB INX Indicative quantity of terminals and relevant section SEZ. 2,5 [sq/mm] 102 I Bartec Feam Catalogue 04

 Open the catalogue to page 8

Explosion Proof Electrical Equipment EJB INX Glass Windows on Cover ENCLOSURE CODE WINDOW CODE Reference details Reference details CUSTODIA tipo ENCLOSURE type Via M. Pagano, 3 I-20090 Trezzano s/N ITALY www.feam-ex.com NON APRIRE SOTTO TENSIONE DO NOT OPEN WHILE ENERGIZED Ad ogni apertura del coperchio ripristinare il grasso ai siliconi. accertarsi che le valvole di respirazione e drenaggio siano sempre chiuse Renew silicone grease every tyme cover is opened. and make sure that the drain and breather valves are always closed. EJB INX Body and cover enclosures drilling layout ENCLOSURE CODE EJB-11...

 Open the catalogue to page 9

EJB INX Body and cover enclosures drilling layout Max allowed q.ty of push button and pilot light 120x120 COVER DRILLING AREA Reference details ENCLOSURE CODE Explosion Proof Electrical Equipment EJB INX Threads comparation table SIZE REMARK: Due to the development of the national and international specifications and of the technology, the above technical characteristics showed on this bulletin can be considered as binding on our confi

 Open the catalogue to page 10

Explosion Proof Electrical Equipment EJC™ Enclosures Installation: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 /22 (Dusts) Classification: Group II - Category 2G 2D REFERENCE STANDARDS Directive 94/9/EC (until April 19th, 2016) and Directive 2014/34/EU (from April 20th, 2016) II 2 G Ex db IIC T6...T3 II 2 G Ex db [ia/ib] IIC T6 II 2 D Ex tb IIIC T85°C…T150°C II 2 D Ex tb [ia/ib] IIIC T85°C EN/IEC 60079-0; EN/IEC 60079-1; EN/IEC 60079-11; EN/IEC 60079-31 PROTECTION DEGREE AMBIENT TEMPERATURE OTHER AVAILABLE CERTIFICATES IECEx: IECEx BKI 11.0010 INMETRO: CEPEL 12.2137 EAC: TC RU C-IT.ГБ08.В.01499...

 Open the catalogue to page 11

All F.E.A.M. s.r.l. catalogues and technical brochures

  1. Miscellaneous

    12 Pages

    En
  2. Control stations

    14 Pages

    En
  3. Conduit fittings

    14 Pages

    En
  4. Lighting fixtures

    94 Pages

    En