catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Heating element, Hot runner system, Strip heater, Hot runner manifold, Controller
Text version of the page
| Pulse™ Series Control Instruction Manual | ||||||||||||||
| Dual Zone 20 Amp Power Module The dual zone 20 Amp power module contains 2 zones of control at 20 amps each in one slot. The outputs are fused on both sides of the line with standard ABC 20 Amp fuses. Reference cabinet layout drawing on page 4 for module placement. There are 4 indicator lights on the Dual zone 20 amp power module: LED 1 (Zone "A" Power Light) ON = Module is in AUTO, MANUAL, VIEW or SLAVE mode OFF = Module is in OFF mode, secondary power relays are disabled. LED 2 (Zone A Load Light) blinks according to the power applied to zone A. LED 3 (Zone B Power Light) ON = Module is in AUTO, MANUAL, VIEW or SLAVE mode OFF = Module is in OFF mode, secondary power relays are disabled. LED 4 (Zone B Load Light) blinks according to the power applied to zone B. | ||||||||||||||
| SECTION REFERENCE GETTING STARTED ................4 Unpacking Your Pulse ................4 What's Included..........................4 Pulse Cabinets............................5 Pulse Modules............................6 Heater & T/C Mold Cables..........8 Connecting the Mold Cables......8 Connecting AC Power................9 | ||||||||||||||
| LED 1 LED 2 LED 3 LED 4 | ||||||||||||||
| Single Zone 30 Amp Power Module The single zone 30 Amp power module contains 30 Amps of control for a single zone in one slot. The output is fused on both sides of the line with standard ABC 30 Amp fuses. | ||||||||||||||
| Reference cabinet layout drawing on page 4 for module placement. There are 2 indicator lights on the Single zone 30 amp power module: LED 1 (Zone Power Light) ON = Module is in AUTO, MANUAL, VIEW or SLAVE mode OFF = Module is in OFF mode, secondary power relays are disabled. LED 2 (Zone Load Light) blinks according to the power applied to the zone. | ||||||||||||||
| 7 | ||||||||||||||