catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Digital controller, Controller, Strip heater, Nozzle, Temperature controller
Text version of the page
| ABOUT... | ||||||||||||||||||||||||||||||
| Pulse™ Series Control Instruction Manual | ||||||||||||||||||||||||||||||
| FILE SYSTEM The File system is the main storage area for all zone parameters in the Pulse. Up to 10 separate File "recipes" can be stored within a Pulse control system. Storage includes: all setpoint changes, mode, and all zone setup parameters. Access to the FILE screen is done through the System Setup screen. From the MAIN screen press F3 SYSTEM, then F2 FILE. There are two columns of information for the FILE SYSTEM screen: Column 1: FILE "File Number" Description: The file number is preassigned by the Pulse system and cannot be altered. Column 2: STATUS "File Status" Selection of the following: EMPTY = File location is set to factory default. FULL = File location has been stored with previous parameters. SELECTED = Current file that has been selected. FILE SYSTEM Function buttons: The function buttons on this screen navigate to the MAIN or FILE screens and perform: F1 MAIN = Go to the MAIN screen. F2 SYSTEM = Go to the SYSTEM screen. F3 CLEAR = CLEAR a highlighted file to factory default settings. F4 LOAD = LOAD a highlighted file. Note: 1. Files cannot be loaded or cleared while the system is in RUN, BOOST, IDLE or any Startup Function. The system must be in STOP mode in order to load or clear a file. | ||||||||||||||||||||||||||||||
| QUICK REFERENCE GETTING STARTED ................4 Unpacking Your Pulse ................4 What's Included..........................4 Pulse Cabinets............................5 Pulse Modules............................6 Heater & T/C Mold Cables..........8 Connecting AC Power................9 ABOUT..................................10 System Operation....................10 Pulse Screens............................12 Help ........................................14 Main Screen ............................15 Zone Setup Parameters............18 System Setup Screen................31 File System ..............................34 Security....................................35 Alarm......................................38 Printing....................................40 HOW TO................................41 Shutting OFF the Alarm............41 Setting Up Multiple Zones........41 Troubleshooting........................42 SPECIFICATIONS ..................43 General....................................43 System ....................................43 | ||||||||||||||||||||||||||||||
| FILE: 2 SECURE: 3 | ||||||||||||||||||||||||||||||
| STATUS | ||||||||||||||||||||||||||||||
| SELECTED EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY | ||||||||||||||||||||||||||||||
| WARRANTY | .44 | |||||||||||||||||||||||||||||
| MAIN I SYSTEM I CLEAR ^^^^ | ||||||||||||||||||||||||||||||
| LOAD | ||||||||||||||||||||||||||||||
| oooo | ||||||||||||||||||||||||||||||
| Fl F2 F3 FUNCTION BUTTONS | F4 | |||||||||||||||||||||||||||||
| 34 | ||||||||||||||||||||||||||||||