catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Hot runner system, Controller, Cartridge heater, Tubular heater, Digital controller
Text version of the page
| Pulse™ Series Control Instruction Manual | |||||||||||||||||||
| Zone BOOST and IDLE Setup This screen sets up the Boost and Idle setpoint values for both temperature and power. This screen is accessed from all of the other Zone Setup screens in this section (reference each screen's function button layout for more details). The Zone Boost and Idle Setup screen has 7 sections of information displayed in a columnar format as shown below. | |||||||||||||||||||
| SECTION REFERENCE ABOUT..................................10 System Operation....................10 RUN........................................10 STOP........................................10 BOOST....................................10 IDLE ........................................11 Navigate/Change Values..........11 Pulse Screens............................12 Help ........................................14 Main Screen ............................15 Zone Main Setup......................18 Zone Limits Setup....................21 Zone Boost/Idle Setup..............25 Zone PID Setup........................28 System Setup Screen................31 File System ..............................34 Security....................................35 Security Setup..........................36 Alarm......................................38 Printing....................................40 | |||||||||||||||||||
| oooo | |||||||||||||||||||
| Fl F2 F3 FUNCTION BUTTONS | |||||||||||||||||||
| F4 | |||||||||||||||||||
| ZONE BOOST/IDLE SETUP Function buttons: The function buttons on this screen navigate to other Zone Setup screens and the Main screen: F1 MAIN = Go to the MAIN screen. F2 ZONE = Go to the ZONE setup screen. F3 LIMITS = Go to the setup zone setpoint LIMITS screen. F4 PID = Go to the PID settings screen. | |||||||||||||||||||
| Column 1: ZN "Hard-Wired Zone Location" Range: 1 to 24 zones. Description: This field cannot be altered as it reflects the hard-wired location of the zones as wired on the supplied cabinet heater/thermocouple connector(s). | |||||||||||||||||||
| 25 | |||||||||||||||||||