Text version of the page

Precision MT45D Multi-Tip Bushes

Body Dimensions (mm)

PRECISION MT45D BUSHINGS Can bend centre section at R 13mm min. 35.6.5 21.0 Overall Typ. 90 (nts) 40mm rigid 900mm flexible hose Ø52.00 A rear insulation washer (MA010028) is recommended for all direct feed applications. 3.20 Ø45.5
Body Length ëL1í Ø33.5 Ø41.0 ØD

Ordering

Ø45.0

The following information is required when ordering •Part Number Of Body Assembly •Part Number Of Bush Tip: -Specify number of gate tips required Specify gate tip pcd required—see below•Specify heater lead exit positionImportantNote the location dowel position relative to the tip position. This cannot be changed. The heater lead exit can be in any position, but must be specified when ordering. Tips have M16 x 1.0 threads and should betorqued down to 30 lb.ft (41Nm). Always use high temperature anti-seize compound on threads.

2 Tips Min. PCD = 20mm Max. PCD = 32mm 3 Tips Min. PCD = 20mm Max. PCD = 32mm 4 Tips Min. PCD = 20mm Max. PCD = 32mm

1

Hot Runner Systems by Fast Heat, Inc. 776 Oaklawn Ave. Elmhurst, Il 60126 • 1 877 RUNRHOT • Tel (630) 833 5400 • Fax (630) 833 5414International Manufacturing & Sales Offices: China (86) 21 5048 0070• United Kingdom (44) 1323 647375 • France (33) 4 77 49 36 46 • Singapore (65) 6398 0220 ®