Text version of the page

Precision MT32D Multi-Tip Bushes

Body Dimensions (mm)

PRECISION MT32D BUSHINGS Ø42.0
Can bend centre section at R 13mm min. Typ. 90 (nts) 40mm rigid 900mm flexible hose
31.75 6.0 21.0 Overall Length ‘L’ Ø40.0 A rear insulation washer (MA010024) is recommended for all direct feed applications. 3.50 Ø34.0 15
o Ø28.0 Ø34.0

Ordering

ØD

The following information is required when ordering •Part Number Of Body Assembly •Part Number Of Bush Tip: -Specify number of gate tips required Specify gate tip pcd required—see below•Specify heater lead exit positionImportantNote the location dowel position relative to the tip position. This cannot be changed. The heater lead exit can be in any position, but must be specified when ordering.

Ø32.0

Tips have 1/2” - 20 UNF threads and shouldbetorqued down to 30 lb.ft (41Nm). Always usehigh temperature anti-seize compound on threads.

2 Tips Min. PCD = 12mm Max. PCD = 20mm 3 Tips Min. PCD = 13mm Max. PCD = 20mm 4 Tips Min. PCD = 17mm Max. PCD = 20mm

1

Hot Runner Systems by Fast Heat, Inc. 776 Oaklawn Ave. Elmhurst, Il 60126 • 1 877 RUNRHOT • Tel (630) 833 5400 • Fax (630) 833 5414International Manufacturing & Sales Offices: China (86) 21 5048 0070• United Kingdom (44) 1323 647375 • France (33) 4 77 49 36 46 • Singapore (65) 6398 0220 ®