Text version of the page

Cartridge Heaters

Internally Connected Leads • For applications requiring maximum flexibility at lead exit. • 300mm (12”) leads standard, other lengths available on request. Externally Connected Leads • As standard, leads connected to staggered steel pins with joints at 20mm (
3 /
4 ”) and 12.5mm (
1 /
2 ”) in length. Other lengths available. Braid Over Pair Of Leads • Stainless steel braid over lead wires. • For applications requiring small radius bending and lead wire abrasion protection. • 300mm (12”) braid standard, other lengths available on request. Square-Lock Armour Protection • Straight stainless steel armour cable protects leads from abrasion. • 300mm (12”) lead standard, other lengths available on request. • Leakproof armour available. 90
o Leads With Stainless Steel Braid D A • Braided leads exit at 90
o angle for applications requiring small radius bends, lead wire protection and where space is limited. • 300mm (12”) braid standard, other lengths available on request. • For any given cartridge diameter (Dimension A), the end cap size (D) will be as shown in the chart. 90
o End Cap Dimensions A
D mm In mm In 90
o Leads With Stainless Steel Armour
9.5 3 / 8 9.5 3 / 8 D A • Armour cable exit at 90
o angle for applications where space is limited and lead wire abrasion protection is required.
12.7 1 / 2 12.7 1 / 2 15.9 5 / 8 15.9 5 / 8 • 300mm (12”) armour standard, other lengths available on request.
19.0 3 / 4 19.0 3 / 4 • Leakproof armour available. • For any given cartridge diameter (Dimension A), the end cap size (D) will Straight Leads With Clip Support • 300mm (12”) leads standard, other lengths available on request. • Clip support helps to minimize lead breakage where leads exit heater. Right Angle Leads With Clip Support • Right angle clip support for applications requiring right angle lead exit and reduced strain on lead wire. • 300mm (12”) leads standard, other lengths available on request. • Clip support helps to minimize lead breakage where leads exit heater. Circlip Option Circlip grooves can be cut into any circular cartridge design to provide depth location. Please specify location of groove. 1.2