Text version of the page

TRIDENT

Plasma, Oxy-fuel, Drill & Marking System

Other Options & Features

The Farley LaserlabTrident is a large footprint multi-torch cutting machine designed to deliver precision, high definition plasma cutting, oxy-fuel cutting and drilling. The Trident is ideally suited to high volume cutting environments such as shipyards, steel services & distribution centres and shops that require continuous operation –3 shifts per day, year after year.The Trident is one of the thoroughbreds of the Farley stable andachieves its accuracy and high productivity by utilising single piece fabricated beam construction, which eliminates bolted joints. Combined with twinside-drives through high precision planetary gear boxes, the result is a machine light enough to achieve plasma profiling speeds of 20m/min yet retaining the rigidity to accept up to 6 torches for multi-torch plate cutting of 250mm thick material. The Trident also has a drilling head with eight BT 40 tools, with the capacity to drill 32mm diameter holes.

•Drilling Head BT 40 tool changer 8 tools •Drilling capacity up to 32mm ∅ •Laser spot device •Break away torch mounts •Mirror image cutting •Data monitoring & management reporting •Auto torch spacing •Remote diagnostics

Low rails for rigidity & higher productivity

•Peck piercing The low level rail construction improves accuracy and stability while reducing the chances of damage from swinging loads on cranes and forklifts.Low rails improve operator access, speeding up loading and unloading and reducing potential safety problems. •Siemens drives •Touch Screen CNC •Shape software

Combination drives for greater accuracy

•Autonesting AC servo drives and planetary gearboxes provide the torque and resolution necessary to ensure accurate position through the life of the machine. The drive system ensures high stiffness essential for accuracy.Twin drive system ensures torch accuracy.Optimum acceleration is ensured through the use of SiemensAC motors.Drilling capacity 32mm diameter. •Arcwriter •Centre drill 6mm •Full 5-axes bevel head

New BT40 Drill Head

•Raise/lower water table BT40 tool holder, accommodating 8 tools. •Dry table •Marking & Engraving

Torch carriage versatility

•Bevel head plasma cutting The rack & pinion primary torch carriage can be fitted with up to three lifters, to accommodate the plasma torch, oxy-fuel torch, marker and centredrill and oxy- fuel with fixed offsets and assured accuracy.

FARLEYLASERLAB

www.farleylaserlab.com.au
©Farley Laserlab 2009 Up to four additional slave torch carriages driven by the primary torch carriage by a stainless steel band. Each torch box is fitted with a 250mm stroke lifter as standard, with provision for additional lifters as required for individual tools.

Farley PDF TS control

The PDF TS 32-bit CNC system with user-friendly interface & large 17”TFT touch screen for control, accuracy & diagnostics.
Due to ongoing product development, Farley Laserlabreserves the right to change specifications without notice. Allrepresentations about performance are subject to operating conditions.

contact us now to find the right solution to your profiling needs