| | | | | | | |
| | FAGOR 8055 M / 8055 MC / 8055 MCO / 8055 GP 8055-t M /8055-t MC /8055-t MCO /8055-tGP | |
| | | |
| | FEATURES | GP | M | MC | MCO | |
| | | | | | | |
| | Spindle orientation M19 | | • | • | • | |
| | Interpolation | | | | | |
| | Linear, Circular, Helical | • | • | • | • | |
| | Tangential control | | ▲ | ▲ | ▲ | |
| | Retrace function | - | ▲ | ▲ | ▲ | |
| | RTCP function | - | ▲ | ▲ | ▲ | |
| | Compensations | | | | | |
| | Tool radius and length | ▲ | • | • | ▲ | |
| | Tool life monitoring | - | ▲ | ▲ | ▲ | |
| | Graphics | | | | | |
| | Tool path | • | • | • | • | |
| | 3 simultaneous views (with depth simulation) | • | • | • | • | |
| | Solid graphics | - | ▲ | ▲ | ▲ | |
| | Operation related | | | | | |
| | Simulation with execution time estimate | • | • | • | • | |
| | N block look-ahead to avoid tool collision | • | • | • | • | |
| | Programming related functions | | | | | |
| | Feedrate as an inverted function oftime | • | • | • | • | |
| | Profile editor | ▲ | ▲ | • | ▲ | |
| | Canned cycles | | | | | |
| | Machining canned cycles | - | • | • | - | |
| | Multiple positioning canned cycles | - | • | • | - | |
| | Probing canned cycles | - | ▲ | ▲ | ▲ | |
| | Digitizing | - | ▲ | ▲ | ▲ | |
| | Tracing | - | ▲ | ▲ | ▲ | |
| | Irregular pockets with islands | - | ▲ | • | ▲ | |
| | Rigid tapping | ▲ | ▲ | ▲ | ▲ | |
| | | • Standard ▲ Option | |
| | FAGOR 8055 T CNC / 8055 TC CNC / 8055 TCO 8055-t T CNC / 8055-t TC CNC / 8055-t TCO | |
| | | |
| | FEATURES | T | TC | TCO | |
| | Spindle related | | | | |
| | Spindle orientation M19 | | | • | |
| | Spindle synchronization | | | • | |
| | Interpolation | | | | |
| | Linear, Circular, Helical | | | | |
| | Tangential control | | | | |
| | Retrace function | | | | |
| | Compensations | | | | |
| | Tool radius and length | | | | |
| | Tool geometry | | | | |
| | Tool life monitoring | | | | |
| | Graphics | | | | |
| | Tool path | | | | |
| | Solid graphics | | | | |
| | Operation related | | | | |
| | Simulation with execution time estimate | | | | |
| | N block look-ahead to avoid tool collision | | | | |
| | Programming related functions | | | | |
| | Feedrate as an inverted function oftime | | | | |
| | Profile editor | | | | |
| | Canned cycles | | | | |
| | Machining canned cycles | | | - | |
| | Probing canned cycles | | | ▲ | |
| | Rigid tapping | | | ▲ | |
| | • Standard ▲ Option | |
| | | | | | | |