Catalogues - fag-heating-devices-powertherm

Catalogue FAG heating devices PowerTherm

www.fis-services.de/site/de/

Page

/ 30

Where to buy
this product ?

Request
a Quote

/ 30

See other catalogues for FAG Industrial Services

Text version of the page

devices

HEATER300

FAG heating device HEATER300

The FAG induction heating device HEATER300 issuitable for heating ring-shaped metal workpieces with bore diameters of115 mm (with accessories 30 mm) and over to a maximum temperature of 400 °C. Due to the high efficiency of the device (cos cp >0,6), the workpiece may weigh up to 300 kg and is heated particularly quickly.

The heating device has a sturdy, scratch-resistant polyurethane housing.

The two lateral supports carry the slewing ledge. The part to be heated can either be placed on the round surface over the induction coil or suspended from the horizontal slewing ledge.

The clearly structured control panel with clear-cut symbols for the different operating modes can also be operated while wearing work gloves. The touch keyboard is oil-resistant, dustproof and waterproof.

The basic version of the device is supplied with a magnetic temperature sensor that can be used up to 240 °C. The rated voltage is 400 V, the frequency is 50 Hz.

The device offers temperature control and time control modes (see

page 5).

Additional functions

• Demagnetisation without heating

• Program interruption

• Target and actual temperatures and times are displayed

Accessories

Slewing ledges are also available as accessories for parts with smaller bore diameters, see Technical Data.

A mobile version is available on request. The heating device can be transported quickly and safely from one application to another using the trolley HEATER300.TROLLEY, which is available as an accessory.

Ordering designation: HEATER300