Text version of the page 
Text version of the page 
1Safety instructions The VISY-X system serves the purpose of measuring and evaluating the fillinglevels in filling station tanks for mineral oil fuels. Use the system for this purpose
only. The manufacturer shall not be liable for any form of damage resulting from
improper use of this system!The measurement value sensor, the measurement evaluation system and theinterface industrial converter were developed, manufactured and inspected in accordance
with state-of-the-art technology and with recognised safety rules and regulations.
Nevertheless, hazards may arise from the use of these devices. Therefore, observe
the following safety instructions.Do not change or modify the system or add any equipment without the priorconsent of the manufacturer.Use original replacement parts only. These comply with the technical requirementsspecified by the manufacturer.The installation, operation and maintenance of the measurement value sensor,the measurement evaluation system and the interface converter is only allowed
to be carried out by expert, authorised personnel. The measurement evaluation
system is only allowed to be installed and serviced by experienced electricians in
accordance with ElexV specifications. Specialised knowledge must be obtained
by undergoing regular training.Operators, installers and service personnel must observe all applicable safetyregulations. This also applies to the local safety regulations and accident
prevention regulations not mentioned in these operating instructions.The interface converter and the measurement evaluation system VISY-Commandare not suitable for outdoor installation and not for use in areas subject to
explosion hazards. It is intended for use within the VISY-X system only.The measuring transducers, type VP-1, and the interface, type VI-... and theIFSF LON interface converter included in the measurement evaluation system
VISY-Command must always be undamaged and clean.During normal operation, the cabinet of the measurement system VISY-Commandmust be closed. IFSF LON Interface Converter Page 3/10
|