LS111FA Laser Distance Meter LASER CLASS 2 ANALOG OUTPUT and SWITCHING PROGRAMMABLE RS232 - RS422 - Profibus DP FAE S.r.l. Via Tertulliano, 41 - 20137 Milan - Italy Tel.: +39 02 55187133 Fax: +39 02 55187399 www.fae.it

LS111FA LS11 - 12 FA series has been designed and manufactured for distance measurements ranging from 0,1m up to 100m on natural targets and ranging from 50 to 150 m on retro-reflectors. The measurement is based on the comparative phase principle, using the shift between emission phase and the back-reflection phase. Installation and mounting are extremely user-friendly. Power supply can range from 10 to 30 VDC, with very low consumption. Four 6.6 mm Ø holes are provided for the mounting. The red visible laser spot guarantees an immediate alignment. RS422 interface is purposely used to take the...

Laser class 650 nm, visible, laser class 2, conforming to standard Laser power Laser divergence Diameter of spot laser 0.2 m to 50 m with natural surfaces more than 100 m if target reflectance high enough Measuring accuracy: ± 3 mm (15 °C...35 °C), ± 2 mm for distance range from 0.1 m to 30 m under defined measuring conditions. Max.: ± 4 mm (across full temp, range and for any type of Sample frequency 6Hz in standard mode measuring any type of surface. Max. target motion speed 5m/s (only for LS121FA - LS122FA) Max acceleration of target 2,5m/s2 (only for LS121FA - LS122FA) 12-pole M18 flange-mount...

Operating temperature Storage temperature Internal protection class 1 Trigger voltage 3 V ... 24 V Trigger threshold + 1.5 V, Trigger flank to start of measurement preset at 5 ms + delay time Trigger pulse length >1ms Delay time (trigger delay) selectable from 0 ms to 9999 ms Trigger flank selectable -10 °C +60 °C -20 °C +70 °C IP65 conditional on target reflectance, ambient light influences and atmospheric conditions FAE S.r.l. Via Tertulliano, 41 - 20137 Milan - Italy Tel.: +39 02 55187133 Fax: +39 02 55187399 www.fae.it

LS111FA Dimensions The laser distance meter type LS111FA is supplied with a M18 connector, corresponding 2 m long interface cable and English instruction manual in a rugged foam-padded cardboard box suitable for transport. 1 Equalizer tube at front cover 2 Casing 3 Protective cap for flange-mount connector 4 Receiver optics 5 Sender optics 6 Mechanical mounting holes (four) 7 12-pole M18 flange-mount connector (Binder series 723) FAE S.r.l. Via Tertulliano, 41 - 20137 Milan - Italy Tel.: +39 02 55187133 Fax: +39 02 55187399 www.fae.it

Software of parameterization with graphical functions Cooling jacket with air Cooling jacket with air + water Cooling jacket with air + water for extreme environments Cables 5 and 10 meters are available with 12-pin female connector M16. FAE S.r.l. Via Tertulliano, 41 - 20137 Milan - Italy www.fae.it [email protected]